Content of this directory

• ApplyAlignment.C Read in the geometry, and get alignment data from CDB, and apply that to the geometry.
• CheckAlign.C Check if alignment is properly applied in simulations
• CheckCalibData.C Check if a file contains the right calibration data
• CheckOverlaps.C Run overlap checker on a loaded geometry
• CheckRaw.C Script that contains a class to compare the raw data written to the digits it's created from.
• checkSizes.sh Obsolete shell script
• Compare.C Compare energy loss deposition from Fluka and GEANT3.21
• CompareMatDep.C (obsolete) Compare the secondary correction from variations in material density
• CompareTrackRefsAndHits.C Compare number of track references and hits from simulation
• Compile.C Compile other scripts using AcLIC
• Convert2Raw.C Convert digits to raw data using AliFMDRawWriter
• ConvertGeom.C Write out all medium parameters in geometry
• deadChannels.C (obsolete) Extract the dead channel information from OCDB files
• Digits2Raw.C (obsolete) Convert digits to raw data using AliFMD
• DisplayDigits.C Show digits using AliFMDDisplay
• DisplayESD.C Show ESD info using AliFMDDisplay
• DisplayHits.C Show MC Hit info using AliFMDDisplay
• DisplayRecs.C Show RecPoint info using AliFMDDisplay
• Document.C (obsolete) Use THtml to document the FMD code
• DoDrawCalib.C Script that calls DrawCalib
• DrawBothDigits.C Draw Digits versus SDigits using AliFMDInput
• DrawCalib.C GUI to draw calibrations
• DrawCalibRaw.C Draw ELoss dist from calibrated raw data using AliFMDInput
• DrawDigits.C Draw the ELoss from digits using AliFMDInput
• DrawDigitsRecs.C Draw the ELoss from digits versus multiplicity from rec points using AliFMDInput
• DrawESD.C Draw the ELoss dist from ESDs using AliFMDInput - somewhat obsolete
• DrawGeometry.C Draw the geometry
• DrawHits.C Draw the ELoss dist versus beta=p/m from MC hits
• DrawHitsDigits.C Draw the MC ELoss versus ADCs
• DrawHitsRecs.C Draw the MC ELoss versus "multiplicity"
• DrawHitsSDigits.C Draw the MC ELoss versus sum-able ADCs
• DrawLego.C Draw summary LEGO (absorbtion, radiation length, ...) plots
• DrawSDigits.C Draw the sum-able ADCs
• DrawTrackRefs.C Draw number of track references in each ring
• DrawXsection.C Draw the x-section for ELoss from GEANT3.21 X-section run
• Dummy.C Make dummy detector classes
• DummyConfig.C An MC configuration that does no stepping in anything but FMD
• dump10bit.C Dump 10bit words from a DDL file
• ESDDataSize.C Estimate the size of the FMD ESD object
• esdQA.C (obsolete) Do an ESD QA run
• FancyDigits.C Fancy display of digits using AliFMDFancy
• FancyHits.C Fancy display of MC hits using AliFMDFancy
• FindCommonModeNoise.C Script to estimate the common mode noise
• FixOCDBEntries.C Script to correct OCDB objects according to file name
• FullMapping.C Map from Hardware address to XYZ coordinates
• GeoGeometry.C Script I used for rapid prototyping of the FMD3 geometry - in particular the support cone
• GetMedia.C Script that contains a class to get the media where a certain track was created. This is used for background studies.
• GetXsection.C Script to get the various cross sections, energy loss, and ranges of a particular particle type in a particular medium. See also DrawXsecttion.C
• Hits2Digits.C (obsolete) Convert MC hits to digits using AliFMD
• Hits2SDigits.C (obsolete) Convert MC hits to sum-able digits using AliFMD
• LoadDummy.C Load the Dummy detector class
• MakeAlignment.C Make the default alignment
• MakeCalibration.C Make dummy calibrations
• MakeFakeDigits.C Make some fake digits
• MakeFakeHits.C Make some fake hits
• MakeLego.C Create LEGO plots from geometry
• makelego.sh Steer running MakeLego.C and DrawLego.C
• MakeMap.C Script to make a class derived from AliFMDMap.
• MakeRecoParam.C Make default reconstruction parameters
• MakeResidualAlignment.C Make fake residual alignment data.
• MakeSpectra.C Compile ELoss spectra in output file
• MakeXsection.C Steer generation of X-section data (see GetXsection and DrawXsection)
• MediaTable.C Script to make a file with a list of medium numbers for all active detectors.
• NodeGeometry.C Script I used for rapid prototyping of the FMD3 geometry - in particular the support cone
• PatternDigits.C Display the pattern of digits
• PatternESD.C Display the pattern of ESD information
• PatternHits.C Display the pattern of MC hits
• PatternRaw.C Display the pattern of Raw digits
• PatternRecs.C Display the pattern of RecPoints
• PatternSDigits.C Display the pattern of MC sum-able digits
• pdc06_config.C MC config
• pdc06_rec.C MC reconstruction
• pdc06_sim.C MC simulation
• Poisson.C Script that illustrates the poisson Nch estimation from ESD
• PoissonHit.C Check Poisson estimate of Nch versus hits
• polar.C A test
• PrintAlignment.C Print alignment data
• PrintCalibration.C Print OCDB calibration data
• PrintSensorVertices.C Print senser vertices from geometry
• Raw2ESD.C Convert raw data to ESD using the AliFMDReconstructor
• RawTest.C (obsolete) Small script to test consistency of writing and reading raw data.
• ReadRaw.C Read raw data using AliRawReader and AliFMDRawReader
• Resolution.C Plot resolution of sensors
• RunAnaESD.C (obsolete) Run analysis over ESD
• RunAnaKine.C (obsolete) Run analysis over MC data
• RunQATest.C Run a test of QA framework
• RunSimpleChain.C A script that will run the most simple chain possible. Uses:
  • MakeFakeHits.C
  • Hits2Digits.C
  • Hits2SDigits.C
  • Digits2Raw.C
  • Raw2ESD.C
• ShowCoordinates.C A script to dump the physical coordinates as given by the geometry.
• ShowFMDITS.C Draw FMD and ITS geometry
• SpectraMonitor.C Monitor data
• TestAcc.C Acceptance correction from strip length
• TestAlignable.C Test align-able volumes
• TestAltroMapping.C Check integrety of Hardware2Detector and Detector2Hardware
• TestESD.C Test Read/Write of AliESDFMD object
• TestESDCompat.C Same as above
• TestESDPhi.C Test the geometry from ESD and from full geometry
• TestFloatMap.C Test I/O of floating point FMD map
• TestGainDA.C Run the gain DA
• TestHWMap.C Test hardware address map by converting from detector coordinates to hardware address and then back again.
• TestIndex.C Test of AliFMDIndex and AliFMDObjIndex
• TestMapAccess.C Test of ForAll access to AliFMDMap
• TestMapAlgebra.C Test algebra on map
• TestMap.C Test I/O of ALiFMDMap
• TestMapIO.C Test I/O of ALiFMDMap
• TestPedestalDA.C Run the pedestal DA
• TestPreprocessor.C Test the SHUTTLE pre-processor using fake data
• TestRaw2SDigits.C Test creation of sum-able digits using AliSimulation
• TestRawIO.C Test I/O of raw data using AliFMDRawWriter and AliFMDRawReader
• TestRawReader.C Check iterative usage of AliFMDRawReader
• TestShaping.C Create an example shaping curve
• TestSurveyToAlignObjs.C Convert survey data into alignment objects
• TestZeroSuppress.C Test the zero-suppression filter of AliFMDRawWriter
• VA1Response.C Script to try to fit the reponse function of the VA1 signals, based on a finite number of ALTRO samples.
• VA1Train.C Small script that shows a signal train from a VA1 pre-amp.
• Wafer.C Small script that I used to make some intial testing of the wafer layout and geometry.
• WriteMedArrays.C Write medium map
• XSection.C Script to get the various cross sections, energy loss, and ranges of a particular particle type in a particular medium.
• dqm
  • fmd_online.C Event display using EVE
  • PatternCalib.C Event display using AliFMDPattern
  • PatternRaw.C Event display using AliFMDPattern
  • SpectraRaw.C Event display using AliFMDPattern