macros Directory Reference

Directory dependency graph for macros:

Files
file	AddTaskMuonAlignment.C [code]
	Macro to add an AliMUONAlignmentTask to an analysis train.
file	CheckTriggerDCS.C [code]
file	commonConfig.C [code]
	Configuration macro for MUON spectrometer Monte Carlo simulation.
file	CompareDigitsOrClusters.C [code]
	Macro to quickly check if two MUON.Digits.root or two MUON.RecPoints are identical.
file	Config.C [code]
file	CreateWeightedRejectList.C [code]
	Macro test for the creation of a RejectList object (for simulations) in the OCDB, for the MUON Tracke.
file	DecodeRecoCocktail.C [code]
	add brief description
file	DIMUONFakes.C [code]
file	fastMUONGen.C [code]
	An example how to use the AliGenMUONCocktailpp generator without GEANT simulation of the detector.
file	fastMUONSim.C [code]
	An example how to do the fast simulation and storing the muons that survive the reconstruction.
file	g3Config.C [code]
	Configuration macro for MUON spectrometer Geant3 simulation.
file	g4Config.C [code]
	Configuration macro for MUON spectrometer Geant4 simulation.
file	gen.C [code]
	Configuration macro for generation of kinematics tree which can be then used as an external event generator.
file	genExtFileConfig.C [code]
	Configuration macro for event generator from external file for MUON spectrometer Monte Carlo simulation.
file	genTestConfig.C [code]
	Configuration macro for event generator for MUON spectrometer Monte Carlo simulation.
file	loadlibcalib.C [code]
	Macro for loading libraries needed for dealing with calibration data containers.
file	loadlibraw.C [code]
	Macro for loading libraries needed for reading & decoding rawdata.
file	loadmacros.C [code]
	Macro which loads and compiles the MUON macros.
file	MakeMUONCDBObjects.C [code]
file	MakeMUONFullMisAlignment.C [code]
	Macro for generating the full misalignment data.
file	MakeMUONRecoParamArray.C [code]
	Macro to set reconstruction parameters and put them in the OCDB.
file	MakeMUONResMisAlignment.C [code]
	Macro for generating the residual misalignment data.
file	MakeMUONSingleRecoParam.C [code]
	Macro to set reconstruction parameters and put them in the OCDB.
file	MakeMUONZeroMisAlignment.C [code]
	Macro for generating the zero misalignment data.
file	MakeSDigits.C [code]
	Macro for generation SDigits from raw data for merging.
file	MergeMuonLight.C [code]
	This macro merges several files built with DecodeRecoCocktail.C into a single one.
file	MUONBusPatchEvolution.C [code]
file	MUONChamberMaterialBudget.C [code]
	Utility macro to check tracking chamber material properties.
file	MUONCheck.C [code]
	Macro for data quality control.
file	MUONCheckDI.C [code]
	Macro for checking AliMUONDataInterface and AliMUONMCDataInterface.
file	MUONCheckMisAligner.C [code]
	This macro performs the misalignment on an existing muon arm geometry.
file	MUONClusterInfo.C [code]
	Macro to fill AliMUONClusterInfo objects.
file	MUONefficiency.C [code]
	add brief description
file	MUONFakes.C [code]
file	MUONGenerateBusPatch.C [code]
	Generates buspatch id and DDL id for given detection element id.
file	MUONGenerateGentleGeometry.C [code]
	Macro for generating a simplified geometry used by the event display alieve. The generated file gentle_geo_muon.root must be placed in EVE/alice-data/. The input is the sensitive volumes list file svmap.dat and the geometry file geometry.root.
file	MUONGenerateGeometryData.C [code]
	Macro for generating the geometry data files: transform.dat, svmap.dat.
file	MUONGenerateTestGMS.C [code]
	Macro to generate ad hoc GMS alignment matrices in the agreed format.
file	MUONGeometryViewingHelper.C [code]
	Macro providing methods helping in viewing geometry.
file	MUONmassPlot_ESD.C [code]
	Macro MUONmassPlot_ESD.C for ESD.
file	MUONOfflineShift.C [code]
	Macro to be used to check raw data during MUON offline shifts.
file	MUONplotefficiency.C [code]
	Macro to compare/plot the Ntuple stored in MUONefficiency.root.
file	MUONRawStreamTracker.C [code]
	Macro for reading tracker raw data.
file	MUONRawStreamTrigger.C [code]
	Macro for reading trigger raw data.
file	MUONReCalcGlobalTrigger.C [code]
	Re-calculate regional/global trigger response from local response.
file	MUONRecoCheck.C [code]
	Utility macro to check the muon reconstruction.
file	MUONRefit.C [code]
	Macro for refitting ESD tracks from ESD pads.
file	MUONStatusMap.C [code]
	Macro to check/test pad status and pad status map makers.
file	MUONSurveyCh1.C [code]
	Macro to process survey and photogrammetry data of chamber 1.
file	MUONSurveyCh2.C [code]
	Macro to process survey and photogrammetry data of chamber 2.
file	MUONSurveyCh3.C [code]
	Macro to process survey and photogrammetry data of chamber 3.
file	MUONSurveyCh4.C [code]
	Macro to process survey and photogrammetry data of chamber 4.
file	MUONSurveyCh5.C [code]
	Macro to process survey and photogrammetry data of chamber 5.
file	MUONSurveyCh8L.C [code]
	Macro to process survey and photogrammetry data of chamber 8L.
file	MUONSurveyUtil.C [code]
	Utility macro for survey data to alignment transformation.
file	MUONTimeRawStreamTracker.C [code]
	Macro for checking the timing (speed) performance of the tracker decoder.
file	MUONTimeRawStreamTrigger.C [code]
	Macro for checking the timing (speed) performace of the two different trigger decoders.
file	MUONTrigger.C [code]
	This macro is to be used to check the trigger algorithm w/o having to (re-)perform simulation and digitalization.
file	MUONTriggerChamberEfficiency.C [code]
	Macro to view and save the trigger chamber efficiency map calculated during reconstruction.
file	MUONTriggerEfficiency.C [code]
	Macro for checking trigger integrated efficiency for dimuons.
file	MUONTriggerEfficiencyPt.C [code]
	Macro to produce trigger single muon efficiency versus pt plots for the 2 pt cuts.
file	ReadRecoCocktail.C [code]
	Base macro to read the trees generated with DecodeRecoCocktail.C.
file	rootlogon.C [code]
	Macro which is run when starting Root in MUON.
file	runDataReconstruction.C [code]
	Macro for running reconstruction.
file	runReconstruction.C [code]
	Macro for running reconstruction.
file	runSimulation.C [code]
	Macro for running simulation.
file	TestMUONPreprocessor.C [code]
	The macro for testing the shuttle preprocessors.
file	TestMUONPreprocessor.h [code]
	The definitions for the macro TestMUONPreprocessor.C.
file	TestRecPoints.C [code]
	This macro is to be used to check the trigger and tracking chamber behaviour through the RecPoints analysis.
file	UpdateCDBCTPConfig.C [code]
	The macro writes a new GRP/CTP/Config trigger configuration file from the GRP/CTP/MUON.cfg trigger descriptor, corresponding to a run where only MUON is used as a trigger detector.