AddTaskGammaHadronCorrelation.C

Go to the documentation of this file.

// Set includes for compilation

#if !defined(__CINT__) || defined(__MAKECINT__)

#include <TString.h>
#include <TSystem.h>
#include <TROOT.h>

#include "AliLog.h"
#include "AliAnalysisTaskCaloTrackCorrelation.h"
#include "AliCaloTrackESDReader.h"
#include "AliCaloTrackAODReader.h"
#include "AliCalorimeterUtils.h"
#include "AliAnaPhoton.h"
#include "AliAnaPi0EbE.h"
#include "AliHistogramRanges.h"
#include "AliAnaParticleIsolation.h"
#include "AliAnaParticleHadronCorrelation.h"
#include "AliAnaChargedParticles.h"
#include "AliAnaCalorimeterQA.h"
#include "AliAnaGeneratorKine.h"
#include "AliAnalysisTaskCaloTrackCorrelation.h"
#include "AliAnaCaloTrackCorrMaker.h"
#include "AliAnalysisManager.h"
#include "AliInputEventHandler.h"
#include "AliVTrack.h"
#include "ConfigureAndGetEventTriggerMaskAndCaloTriggerString.C"
#include "AliESDtrackCuts.h"
#include "CreateTrackCutsPWGJE.C"
//#include "ConfigureEMCALRecoUtils.C"
#include "GetAlienGlobalProductionVariables.C"
#endif

// Declare methods for compilation

AliCaloTrackReader  * ConfigureReader        (TString col,           Bool_t simulation,
                                              TString clustersArray, Bool_t tender,
                                              TString calorimeter,   Bool_t nonLinOn,
                                              TString trigger,       Bool_t rejectEMCTrig,
                                              Int_t   minCen,        Int_t  maxCen,
                                              Bool_t  printSettings, Int_t  debug       );
AliCalorimeterUtils * ConfigureCaloUtils     (TString col,           Bool_t simulation,
                                              Bool_t tender,         TString calorimeter,
                                              Bool_t  nonLinOn,      Int_t  year,
                                              Bool_t  printSettings, Int_t  debug            );
AliAnaPhoton        * ConfigurePhotonAnalysis(TString col,           Bool_t simulation,
                                              TString calorimeter,   Int_t  year,  Int_t tm,
                                              Bool_t  printSettings, Int_t  debug            );
AliAnaPi0EbE        * ConfigurePi0EbEAnalysis(TString particle,      Int_t  analysis,
                                              Bool_t useSSIso,       Bool_t useAsy,
                                              TString col,           Bool_t simulation,
                                              TString calorimeter,   Int_t  year, Int_t tm,
                                              Bool_t  printSettings, Int_t  debug            );
AliAnaParticleIsolation* ConfigureIsolationAnalysis
                                             (TString particle,      Int_t   leading,
                                              Int_t partInCone,      Int_t   thresType,
                                              Float_t cone,          Float_t pth,      Bool_t multi,
                                              TString col,           Bool_t  simulation,
                                              TString calorimeter,   Int_t   year,      Int_t tm,
                                              Bool_t  printSettings, Int_t   debug                    );
AliAnaParticleHadronCorrelation * ConfigureHadronCorrelationAnalysis
                                             (TString particle,      Int_t   leading,
                                              Bool_t  bIsolated,     Float_t shshMax,
                                              Int_t partInCone,      Int_t   thresType,
                                              Float_t cone,          Float_t pth,      Bool_t mixOn,
                                              TString col,           Bool_t  simulation,
                                              TString calorimeter,   Int_t   year,     Int_t tm,
                                              Bool_t  printSettings, Int_t   debug                     );
AliAnaChargedParticles* ConfigureChargedAnalysis
                                             (Bool_t simulation,     Bool_t  printSettings, Int_t   debug);
AliAnaCalorimeterQA * ConfigureQAAnalysis    (TString col,           Bool_t  simulation,
                                              TString calorimeter,   Int_t   year,
                                              Bool_t  printSettings, Int_t   debug                     );
AliAnaGeneratorKine* ConfigureGenKineAnalysis(Int_t   thresType,     Float_t cone,      Float_t pth,
                                              TString col,           Bool_t  simulation,
                                              TString calorimeter,   Int_t   year,
                                              Bool_t  printSettings, Int_t   debug                     );

void SetAnalysisCommonParameters             (AliAnaCaloTrackCorrBaseClass* ana,
                                              TString calorimeter , Int_t  year,
                                              TString col         , Bool_t simulation,
                                              Bool_t printSettings, Int_t  debug);


TString kAnaGammaHadronCorr = "";

AliAnalysisTaskCaloTrackCorrelation * AddTaskGammaHadronCorrelation
(
 TString  calorimeter   = "EMCAL", // "DCAL", "PHOS"
 Bool_t   simulation    = kFALSE,
 Int_t    year          = 2011,
 TString  col           = "pp",
 Int_t    rejectEMCTrig = 0,
 TString  clustersArray = "",
 Bool_t   tender        = kFALSE,
 Bool_t   nonLinOn      = kFALSE,
 Float_t  shshMax       = 0.27,
 Float_t  isoCone       = 0.4,
 Float_t  isoPtTh       = 0.5,
 Int_t    isoMethod     = AliIsolationCut::kPtThresIC,
 Int_t    isoContent    = AliIsolationCut::kNeutralAndCharged,
 Int_t    leading       = 0,
 Int_t    tm            = 1,
 Int_t    minCen        = -1,
 Int_t    maxCen        = -1,
 Bool_t   mixOn         = kTRUE,
 Bool_t   qaAn          = kFALSE,
 Bool_t   chargedAn     = kFALSE,
 TString  outputfile    = "",
 Bool_t   printSettings = kFALSE,
 Int_t    debug         = 0,  
 const char *trigSuffix = "EMC7"
)
{
  // Check the global variables, and reset the provided ones if empty.
  //
  TString trigger = trigSuffix;

  gROOT->LoadMacro("$ALICE_PHYSICS/PWGGA/CaloTrackCorrelations/macros/GetAlienGlobalProductionVariables.C");
  
  TString period      = "LHC17";
  Bool_t  printGlobal = kTRUE;
  
  GetAlienGlobalProductionVariables(simulation,col,period,year,printGlobal);

  printf("Passed settings:\n calorimeter <%s>, simulation <%d>, year <%d>,\n col <%s>, trigger <%s>, reject EMC <%d>, clustersArray <%s>, tender <%d>, non linearity <%d>\n shshMax <%2.2f>, isoCone <%2.2f>, isoPtTh <%2.2f>, isoMethod <%d>,isoContent <%d>,\n leading <%d>, tm <%d>, minCen <%d>, maxCen <%d>, mixOn <%d>,\n qaAn <%d>, chargedAn <%d>, outputfile <%s>, printSettings <%d>, debug <%d>\n",
         calorimeter.Data(),simulation,year,col.Data(),trigger.Data(), rejectEMCTrig, clustersArray.Data(),tender, nonLinOn, shshMax,
         isoCone,isoPtTh,isoMethod,isoContent,leading,tm,
         minCen,maxCen,mixOn,qaAn,chargedAn,outputfile.Data(),printSettings,debug);
  
  // Get the pointer to the existing analysis manager via the static access method.
  AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
  if (!mgr)
  {
    ::Error("AddTask", "No analysis manager to connect to.");
    return NULL;
  }
  
  // Check the analysis type using the event handlers connected to the analysis manager.
  
  if (!mgr->GetInputEventHandler())
  {
    ::Error("AddTask", "This task requires an input event handler");
    return NULL;
  }
  
  // Make sure the B field is enabled for track selection, some cuts need it
  ((AliInputEventHandler*)mgr->GetInputEventHandler())->SetNeedField(kTRUE);
  
  // Name for containers
  
  //kAnaGammaHadronCorr = Form("%s_Trig%s_Cl%s_TM%d_R%1.1f_Pt%1.1f",calorimeter.Data(), trigger.Data(),kClusterArray.Data(),tm,cone,pth);
  kAnaGammaHadronCorr = Form("GammaHadron_%s_Trig%s_Col_%s_Year%d_Cl%s_Ten%d_TM%d_M02_%1.2f_IsoParam_C%1.2fPt%1.2fM%dPa%d_Lead%d_Mix%d",
                             calorimeter.Data(),trigger.Data(),col.Data(),year,clustersArray.Data(),tender,
                             tm, shshMax,isoCone,isoPtTh,isoMethod,isoContent,leading,mixOn);
  
  if(col=="PbPb" && maxCen>=0) kAnaGammaHadronCorr+=Form("Cen%d_%d",minCen,maxCen);
  
  printf("<<<< NAME: %s >>>>>\n",kAnaGammaHadronCorr.Data());
  
  // #### Configure analysis ####
  
  AliAnaCaloTrackCorrMaker * maker = new AliAnaCaloTrackCorrMaker();
  
  // General frame setting and configuration
  maker->SetReader   ( ConfigureReader   (col,simulation,clustersArray,tender,calorimeter,nonLinOn,trigger,rejectEMCTrig,minCen,maxCen,printSettings,debug) );
  maker->SetCaloUtils( ConfigureCaloUtils(col,simulation,              tender,calorimeter,nonLinOn,year,printSettings,debug) );
  
  // Analysis tasks setting and configuration
  Int_t n = 0;//Analysis number, order is important
  
  //
  // Photon analysis
  //
  maker->AddAnalysis(ConfigurePhotonAnalysis(col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Photon cluster selection
  
  
  maker->AddAnalysis(ConfigurePi0EbEAnalysis("Pi0"        , AliAnaPi0EbE::kIMCalo,kFALSE,kFALSE,
                                             col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Pi0 event by event selection, invariant mass and photon tagging from decay
  
  maker->AddAnalysis(ConfigurePi0EbEAnalysis("Eta"        , AliAnaPi0EbE::kIMCalo,kFALSE,kFALSE,
                                             col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Eta event by event selection, invariant mass and photon tagging from decay
  
  maker->AddAnalysis(ConfigurePi0EbEAnalysis("Pi0SideBand", AliAnaPi0EbE::kIMCalo,kFALSE,kFALSE,
                                             col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Pi0 out of peak event by event selection, and photon tagging from decay
  
  maker->AddAnalysis(ConfigurePi0EbEAnalysis("EtaSideBand", AliAnaPi0EbE::kIMCalo,kFALSE,kFALSE,
                                             col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Eta out of peak event by event selection, and photon tagging from decay
  
  
  maker->AddAnalysis(ConfigureIsolationAnalysis("Photon", leading, isoContent,isoMethod,isoCone,isoPtTh, kFALSE,
                                                col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Photon isolation
  
  
  maker->AddAnalysis(ConfigureHadronCorrelationAnalysis("Photon", leading, kFALSE, shshMax, isoContent,isoMethod,isoCone,isoPtTh, mixOn,
                                                        col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Gamma-hadron correlation
  
  maker->AddAnalysis(ConfigureHadronCorrelationAnalysis("Photon", leading, kTRUE,  shshMax, isoContent,isoMethod,isoCone,isoPtTh, mixOn,
                                                        col,simulation,calorimeter,year,tm,printSettings,debug) , n++); // Isolated gamma hadron correlation
  
  //
  // Merged pi0 analysis
  //
  maker->AddAnalysis(ConfigurePi0EbEAnalysis("Pi0", AliAnaPi0EbE::kSSCalo,kTRUE,kTRUE,
                                             col,simulation,calorimeter,year,tm,printSettings,debug), n++); // Pi0 event by event selection, cluster splitting
  
  maker->AddAnalysis(ConfigureIsolationAnalysis("Pi0SS", leading, isoContent,isoMethod,isoCone,isoPtTh, kFALSE,
                                                col,simulation,calorimeter,year,tm,printSettings,debug), n++);          // Pi0 isolation, cluster splits
  
  
  maker->AddAnalysis(ConfigureHadronCorrelationAnalysis("Pi0SS", leading, kFALSE, shshMax, isoContent,isoMethod,isoCone,isoPtTh, mixOn,
                                                        col,simulation,calorimeter,year,tm,printSettings,debug), n++);  // Pi0-hadron correlation
  
  maker->AddAnalysis(ConfigureHadronCorrelationAnalysis("Pi0SS", leading, kTRUE,  shshMax, isoContent,isoMethod,isoCone,isoPtTh, mixOn,
                                                        col,simulation,calorimeter,year,tm,printSettings,debug) , n++); // Isolated pi0-hadron correlation
  
  // Check the generated kinematics
  if(simulation)  maker->AddAnalysis(ConfigureGenKineAnalysis(isoMethod,isoCone,isoPtTh,
                                                              col,simulation,calorimeter,year,printSettings,debug), n++);
  
  // Charged analysis
  if(chargedAn)   maker->AddAnalysis(ConfigureChargedAnalysis(simulation,printSettings,debug), n++); // track selection checks
  
  // Calo QA
  if(qaAn)        maker->AddAnalysis(ConfigureQAAnalysis(col,simulation,calorimeter,year,printSettings,debug) , n++);
  
  maker->SetAnaDebug(debug)  ;
  
  maker->SwitchOnHistogramsMaker()  ;
  maker->SwitchOnAODsMaker()  ;
  
  if( simulation || !trigger.Contains("EMC") ) maker->SwitchOffDataControlHistograms();
  
  if(simulation)
  {
    // Calculate the cross section weights, apply them to all histograms 
    // and fill xsec and trial histo. Sumw2 must be activated.
    //maker->GetReader()->GetWeightUtils()->SwitchOnMCCrossSectionCalculation(); 
    //maker->SwitchOnSumw2Histograms();
    
    // For recent productions where the cross sections and trials are not stored in separate file
    //maker->GetReader()->GetWeightUtils()->SwitchOnMCCrossSectionFromEventHeader() ;
    
    // Just fill cross section and trials histograms.
    maker->GetReader()->GetWeightUtils()->SwitchOnMCCrossSectionHistoFill(); 
    
    // Add control histogram with pT hard to control aplication of weights 
    maker->SwitchOnPtHardHistogram();
  }
  
  if(printSettings) maker->Print("");
  
  printf("<< End Configuration of %d analysis for calorimeter %s >>\n",n, calorimeter.Data());
  
  //
  // Create task, pass the maker and add it to the manager
  //
  AliAnalysisTaskCaloTrackCorrelation * task = new AliAnalysisTaskCaloTrackCorrelation (Form("%s",kAnaGammaHadronCorr.Data()));
  
  task->SetDebugLevel(debug);
  
  //task->SetBranches("ESD:AliESDRun.,AliESDHeader");
  //task->SetConfigFileName(""); //Don't configure the analysis via configuration file.
  
  task->SetAnalysisMaker(maker);
  
  mgr->AddTask(task);

  //
  // Select events trigger depending on trigger
  //
  maker->GetReader()->SwitchOnEventTriggerAtSE(); // on is default case
  if(!simulation)
  {
    gROOT->LoadMacro("$ALICE_PHYSICS/PWGGA/CaloTrackCorrelations/macros/ConfigureAndGetEventTriggerMaskAndCaloTriggerString.C");
    TString caloTriggerString = "";
    UInt_t mask = ConfigureAndGetEventTriggerMaskAndCaloTriggerString(trigger, year, caloTriggerString);

    maker->GetReader()->SetFiredTriggerClassName(caloTriggerString);

    // For mixing with AliAnaParticleHadronCorrelation switch it off
    if(mixOn)
    {
      maker->GetReader()->SwitchOffEventTriggerAtSE();
      maker->GetReader()->SetEventTriggerMask(mask); 
      // what to do with caloTriggerString?
      
      // Careful, not all productions work with kMB, try kINT7, kINT1, kAnyINT
      //reader->SetMixEventTriggerMask(AliVEvent::kMB); 
      maker->GetReader()->SetMixEventTriggerMask(AliVEvent::kINT7); 
      
      printf("---Trigger selection done in AliCaloTrackReader!!!\n");
    }
    else
    {
      task ->SelectCollisionCandidates( mask );
    }
  }
  
  //
  // Create containers
  //
  if(outputfile.Length()==0) outputfile = AliAnalysisManager::GetCommonFileName();
  
  AliAnalysisDataContainer *cout_pc   = mgr->CreateContainer(kAnaGammaHadronCorr, TList::Class(),
                                                             AliAnalysisManager::kOutputContainer,
                                                             Form("%s",outputfile.Data()));
  
  AliAnalysisDataContainer *cout_cuts = mgr->CreateContainer(Form("Param_%s",kAnaGammaHadronCorr.Data()), TList::Class(),
                                                             AliAnalysisManager::kParamContainer,
                                                             "AnalysisParameters.root");
  
  // Create ONLY the output containers for the data produced by the task.
  // Get and connect other common input/output containers via the manager as below
  //==============================================================================
  mgr->ConnectInput  (task, 0, mgr->GetCommonInputContainer());
  //if(!kData.Contains("delta")   && outputAOD) mgr->ConnectOutput (task, 0, mgr->GetCommonOutputContainer());
  mgr->ConnectOutput (task, 1, cout_pc);
  mgr->ConnectOutput (task, 2, cout_cuts);
  
  return task;
}

AliCaloTrackReader * ConfigureReader(TString col,           Bool_t simulation,
                                     TString clustersArray, Bool_t tender,
                                     TString calorimeter,   Bool_t nonLinOn,
                                     TString trigger,       Bool_t rejectEMCTrig,
                                     Int_t   minCen,        Int_t  maxCen,
                                     Bool_t  printSettings, Int_t  debug         )
{
  // Get the data type ESD or AOD
  AliAnalysisManager * mgr = AliAnalysisManager::GetAnalysisManager();
  TString inputDataType = mgr->GetInputEventHandler()->GetDataType();
  
  AliCaloTrackReader * reader = 0;
  if     (inputDataType == "AOD") reader = new AliCaloTrackAODReader();
  else if(inputDataType == "ESD") reader = new AliCaloTrackESDReader();
  else printf("AliCaloTrackReader::ConfigureReader() - Data not known InputData=%s\n",inputDataType.Data());
  
  reader->SetDebug(debug);//10 for lots of messages
  
  //
  // MC settings
  //
  // Check if kine stack is available, independent of request of simulation
//  Bool_t useKinematics = kFALSE;
//  useKinematics = (mgr->GetMCtruthEventHandler())?kTRUE:kFALSE;
//  
//  if(simulation)
//  {
//    if (!useKinematics && inputDataType=="AOD") useKinematics = kTRUE; //AOD primary should be available ...
//  }
    
  // In case of Pythia pt Hard bin simulations (jet-jet, gamma-jet)
  // reject some special events that bother the cross section
  if(simulation)
  {
    // Event rejection cuts for jet-jet simulations, do not use in other
    reader->SetPtHardAndJetPtComparison(kTRUE);
    reader->SetPtHardAndJetPtFactor(2);
    
    // Event rejection more suitable for gamma-jet simulations, do not use in other
//    reader->SetPtHardAndClusterPtComparison(kTRUE);
//    reader->SetPtHardAndClusterPtFactor(1.5);
  }
  
  //---------------------------
  // Detectors acceptance, open
  //---------------------------

  reader->SwitchOnFiducialCut();
  
  // Tracks
  reader->GetFiducialCut()->SetSimpleCTSFiducialCut(0.8, 0, 360) ;
  
  // EMCal/DCal
  if      ( calorimeter == "EMCAL" ) reader->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.70,  80, 187) ;
  else if ( calorimeter == "DCAL"  ) reader->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.70, 260, 327) ; 
  
  //PHOS
  reader->GetFiducialCut()->SetSimplePHOSFiducialCut (0.12, 250, 320) ; 
  
  //------------------------
  // Detector input filling
  //------------------------
  
  //Min cluster/track E
  reader->SetEMCALEMin(0.3);
  reader->SetEMCALEMax(1000);
  reader->SetPHOSEMin(0.3);
  reader->SetPHOSEMax(1000);
  reader->SetCTSPtMin(0.2);
  reader->SetCTSPtMax(1000);
  
  reader->SwitchOffRecalculateVertexBC();
  reader->SwitchOffVertexBCEventSelection();
  
  // Shower shape smearing
  // Set it in the train configuration page not here for the moment
  //  if(simulation)
  //  {
  //    reader->SwitchOffShowerShapeSmearing(); // Active only on MC, off by default
  //    reader->SetShowerShapeSmearWidth(0.005);
  //  }
  
  //
  // Tracks
  //
  reader->SwitchOnCTS();
  
  reader->SwitchOffUseTrackTimeCut();
  reader->SetTrackTimeCut(0,50);
  
  reader->SwitchOffUseTrackDCACut();
  //reader->SetTrackDCACut(0,0.0105);
  //reader->SetTrackDCACut(1,0.035);
  //reader->SetTrackDCACut(2,1.1);
  
  if(inputDataType=="ESD")
  {
    gROOT->LoadMacro("$ALICE_PHYSICS/PWGJE/macros/CreateTrackCutsPWGJE.C");
    
    //AliESDtrackCuts * esdTrackCuts = CreateTrackCutsPWGJE(10041004);
    //reader->SetTrackCuts(esdTrackCuts);
    
    AliESDtrackCuts * esdTrackCuts  = CreateTrackCutsPWGJE(10001008);
    reader->SetTrackCuts(esdTrackCuts);
    AliESDtrackCuts * esdTrackCuts2 = CreateTrackCutsPWGJE(10011008);
    reader->SetTrackComplementaryCuts(esdTrackCuts2);
    
    reader->SwitchOnConstrainTrackToVertex();
  }
  else if(inputDataType=="AOD")
  {
    reader->SwitchOnAODHybridTrackSelection(); // Check that the AODs have Hybrids!!!!
    reader->SwitchOnAODTrackSharedClusterSelection();
    reader->SetTrackStatus(AliVTrack::kITSrefit);
    
    //reader->SwitchOnAODPrimaryTrackSelection(); // Used in preliminary results of QM from Nicolas and Xiangrong?
    //reader->SwitchOnTrackHitSPDSelection();     // Check that the track has at least a hit on the SPD, not much sense to use for hybrid or TPC only tracks
    //reader->SetTrackFilterMask(128);            // Filter bit, not mask, use if off hybrid, TPC only
  }
  
  //
  // Calorimeter
  //
  if(clustersArray == "" && !tender)
  {
    printf("**************** Standard EMCAL clusters branch analysis **************** \n");
    reader->SwitchOnClusterRecalculation();
    // Check in ConfigureCaloUtils that the recalibration and bad map are ON
  }
  else
  {
    printf("**************** Input for analysis is Clusterizer %s **************** \n", clustersArray.Data());
    reader->SetEMCALClusterListName(clustersArray);
    reader->SwitchOffClusterRecalculation();
  }
  
  // Time cuts
  reader->SwitchOffUseParametrizedTimeCut();
  if(simulation)
  {
    reader->SwitchOffUseEMCALTimeCut();
    reader->SetEMCALTimeCut(-1e10,1e10); // Open time cut
  }
  else
  {
    reader->SwitchOnUseEMCALTimeCut();
    reader->SetEMCALTimeCut(-25,20);
  }
  
  // CAREFUL
  if(nonLinOn) reader->SwitchOnClusterELinearityCorrection();
  else         reader->SwitchOffClusterELinearityCorrection();
  
  if(calorimeter == "EMCAL" || calorimeter == "DCAL" )
  {
    reader->SwitchOnEMCALCells();
    reader->SwitchOnEMCAL();
  }
  
  if(calorimeter == "PHOS")
  { // Should be on if QA is activated with correlation on
    reader->SwitchOnPHOSCells();
    reader->SwitchOnPHOS();
  }
  
  //-----------------
  // Event selection
  //-----------------
  
  //if(!simulation) reader->SetFiredTriggerClassName("CEMC7EGA-B-NOPF-CENTNOTRD"); // L1 Gamma
  
  // Event triggered by EMCal selection settings
  reader->SwitchOffTriggerPatchMatching();
  reader->SwitchOffBadTriggerEventsRemoval();
  
  if( rejectEMCTrig > 0 && !simulation && (trigger.Contains("EMC") || trigger.Contains("L")))
  {
    printf("=== Remove bad triggers === \n");
    reader->SwitchOnTriggerPatchMatching();
    reader->SwitchOnBadTriggerEventsRemoval();
    
    //    reader->SetTriggerPatchTimeWindow(8,9); // default values
    //    if     (kRunNumber < 146861) reader->SetEventTriggerL0Threshold(3.);
    //    else if(kRunNumber < 154000) reader->SetEventTriggerL0Threshold(4.);
    //    else if(kRunNumber < 165000) reader->SetEventTriggerL0Threshold(5.5);
    //    //redefine for other periods, triggers
    //
    //    if(kRunNumber < 172000)
    //    {
    //      reader->SetEventTriggerL1Bit(4,5); // current LHC11 data
    //      printf("\t Old L1 Trigger data format!\n");
    //    }
    //    else
    //    {
    //      reader->SetEventTriggerL1Bit(6,8); // LHC12-13 data
    //      printf("\t Current L1 Trigger data format!\n");
    //    }
    
    if(clustersArray != "" || tender)
    {
      printf("Trigger cluster calibration OFF\n");
      reader->SwitchOffTriggerClusterTimeRecal() ;
    }
    
  }
  
  //reader->RejectFastClusterEvents() ;
    
  reader->SetZvertexCut(10.);               // Open cut
  reader->SwitchOnPrimaryVertexSelection(); // and besides primary vertex
  reader->SwitchOnRejectNoTrackEvents();
  
  reader->SwitchOffV0ANDSelection() ;       // and besides v0 AND
  reader->SwitchOffPileUpEventRejection();  // remove pileup by default off, apply it only for MB not for trigger
  
  if(col=="PbPb")
  {
    // Centrality
    reader->SetCentralityClass("V0M");
    reader->SetCentralityOpt(100);  // 10 (c= 0-10, 10-20 ...), 20  (c= 0-5, 5-10 ...) or 100 (c= 1, 2, 3 ..)
    reader->SetCentralityBin(minCen,maxCen); // Accept all events, if not select range
    //reader->SwitchOnAcceptOnlyHIJINGLabels();
    // Event plane (only used in Maker and mixing for AliAnaPi0/AliAnaHadronCorrelation for the moment)
    reader->SetEventPlaneMethod("V0");
  }
  
  if(printSettings) reader->Print("");
  
  return reader;
}

AliCalorimeterUtils* ConfigureCaloUtils(TString col,    Bool_t simulation,
                                        Bool_t  tender, TString calorimeter,
                                        Bool_t nonLinOn,      
                                        Int_t   year,   Bool_t printSettings, 
                                        Int_t   debug)
{
  AliCalorimeterUtils *cu = new AliCalorimeterUtils;
  
  cu->SetDebug(debug);
  
  // Remove clusters close to borders, at least max energy cell is 1 cell away
  cu->SetNumberOfCellsFromEMCALBorder(1);
  cu->SetNumberOfCellsFromPHOSBorder (2);
  
  cu->SetNumberOfSuperModulesUsed(10);
  
  if ( calorimeter == "PHOS" )
  {
    if(year < 2014) cu->SetNumberOfSuperModulesUsed(3);
    else            cu->SetNumberOfSuperModulesUsed(4);
  }
  else 
  {
    Int_t nSM     = 20;
    Int_t lastEMC = 11;
    if      (year == 2010) { nSM =  4; lastEMC = 3; }// EMCAL first year
    else if (year <  2014) { nSM = 10; lastEMC = 9; }// EMCAL active 2011-2013
    
    cu->SetNumberOfSuperModulesUsed(nSM);
    
    if      (calorimeter.Contains("EMCAL"))
    {
      cu->SetFirstSuperModuleUsed( 0);
      cu->SetLastSuperModuleUsed (lastEMC);
    }
    else if (calorimeter.Contains("DCAL"))
    {
      cu->SetFirstSuperModuleUsed(12);
      cu->SetLastSuperModuleUsed (19);
    }
    else
    {
      cu->SetFirstSuperModuleUsed(0);
      cu->SetLastSuperModuleUsed (cu->GetNumberOfSuperModulesUsed()-1);
    }
    
    printf("AddTaskGammaHadronCorrelation::CalorimeterUtils() - nSM %d, first %d, last %d\n",
           cu->GetNumberOfSuperModulesUsed(),cu->GetFirstSuperModuleUsed(), cu->GetLastSuperModuleUsed());
  }
  
  // Search of local maxima in cluster
  if(col=="pp")
  {
    cu->SetLocalMaximaCutE(0.1);
    cu->SetLocalMaximaCutEDiff(0.03);
  }
  else
  {
    cu->SetLocalMaximaCutE(0.2);
    cu->SetLocalMaximaCutEDiff(0.03);
  }
  
  cu->SwitchOffRecalculateClusterTrackMatching();
  
  cu->SwitchOnBadChannelsRemoval() ;
  
  // EMCAL settings
  
  if(!simulation)
    cu->SwitchOnLoadOwnEMCALGeometryMatrices();
  
  AliEMCALRecoUtils * recou = cu->GetEMCALRecoUtils();
  
  // calibrations
  Bool_t calibEner = kFALSE;
  Bool_t calibTime = kFALSE;
  cu->SwitchOffRecalibration();
  cu->SwitchOffRunDepCorrection();
  
  if( !tender )
  {
    cu->SwitchOnRecalibration(); // Check the reader if it is taken into account during filtering
    cu->SwitchOnRunDepCorrection();
    
    calibEner = kTRUE;
    calibTime = kTRUE;
  }
  
  if( simulation )
  {
    calibEner = kFALSE;
    calibTime = kFALSE;
    
    cu->SwitchOffRecalibration(); // Check the reader if it is taken into account during filtering
    cu->SwitchOffRunDepCorrection();
  }
  
//  gROOT->LoadMacro("$ALICE_PHYSICS/PWGPP/EMCAL/macros/ConfigureEMCALRecoUtils.C");
//  ConfigureEMCALRecoUtils(recou,
//                          simulation,
//                          kTRUE,      // exotic
//                          nonLinOn,   // Non linearity
//                          calibEner,  // E calib
//                          kTRUE,      // bad map
//                          calibTime); // time calib
  
  cu->ConfigureEMCALRecoUtils(simulation,
                              kTRUE,      // exotic
                              nonLinOn,   // Non linearity
                              calibEner,  // E calib
                              kTRUE,      // bad map
                              calibTime); // time calib
  
  if( calibTime ) recou->SetExoticCellDiffTimeCut(50);
  
  if( nonLinOn )  cu->SwitchOnCorrectClusterLinearity();
  
  printf("ConfigureCaloUtils() - EMCAL Recalibration ON? %d %d\n",recou->IsRecalibrationOn(), cu->IsRecalibrationOn());
  printf("ConfigureCaloUtils() - EMCAL BadMap        ON? %d %d\n",recou->IsBadChannelsRemovalSwitchedOn(), cu->IsBadChannelsRemovalSwitchedOn());
  
  // PHOS
  cu->SwitchOffLoadOwnPHOSGeometryMatrices();
  
  if(printSettings) cu->Print("");
  
  return cu;
}

AliAnaPhoton* ConfigurePhotonAnalysis(TString col,           Bool_t simulation,
                                      TString calorimeter,   Int_t year, Int_t tm,
                                      Bool_t  printSettings, Int_t   debug)
{
  AliAnaPhoton *ana = new AliAnaPhoton();
  
  // cluster selection cuts
  
  ana->SwitchOffRealCaloAcceptance();
  
  ana->SwitchOffFiducialCut();
  
  ana->SetCalorimeter(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetCalorimeter(calo);
  }
  
  ana->SwitchOnFillShowerShapeHistograms();  // Filled before photon shower shape selection
  
  //if(!simulation) ana->SwitchOnFillPileUpHistograms();
  
  if(tm) ana->SwitchOnTrackMatchRejection() ;
  else   ana->SwitchOffTrackMatchRejection() ;
  
  ana->SwitchOnTMHistoFill() ;
  
  if(calorimeter == "PHOS")
  {
    ana->SetNCellCut(2);// At least 3 cells
    ana->SetMinPt(0.3);
    ana->SetMinDistanceToBadChannel(2, 4, 5);
    ana->SetTimeCut(-1e10,1e10); // open cut
  }
  else
  {//EMCAL
    ana->SetNCellCut(1);// At least 2 cells
    ana->SetMinEnergy(0.3); // avoid mip peak at E = 260 MeV
    ana->SetMaxEnergy(100);
    ana->SetTimeCut(-1e10,1e10); // open cut, usual time window of [425-825] ns if time recalibration is off
    // restrict to less than 100 ns when time calibration is on
    ana->SetMinDistanceToBadChannel(2, 4, 6);
    
    // NLM cut, used in all, exclude clusters with more than 2 maxima
    // Not needed if M02 cut is already strong or clusterizer V2
    ana->SetNLMCut(1, 2) ;
  }
  
  //PID cuts (shower shape)
  ana->SwitchOnCaloPID(); // do PID selection, unless specified in GetCaloPID, selection not based on bayesian
  AliCaloPID* caloPID = ana->GetCaloPID();
  //Not used in bayesian
  
  // EMCAL
  
  //caloPID->SetEMCALLambda0CutMax(0.27);
  caloPID->SetEMCALLambda0CutMax(10); // open, full shower shape needed for isolation studies
  caloPID->SetEMCALLambda0CutMin(0.10);
  
  // Track matching
  // tm = 1, fixed cuts
  caloPID->SetEMCALDEtaCut(0.025);
  caloPID->SetEMCALDPhiCut(0.030);
  
  // pT track dependent cuts
  if(tm > 1) caloPID->SwitchOnEMCTrackPtDepResMatching();
  
  // PHOS
  caloPID->SetPHOSDispersionCut(2.5);
  caloPID->SetPHOSRCut(2.);
  //if(kInputData=="AOD") caloPID->SetPHOSRCut(2000.); // Open cut since dX, dZ not stored
  
  // Branch AOD settings
  ana->SetOutputAODName(Form("PhotonTrigger_%s",kAnaGammaHadronCorr.Data()));
  ana->SetOutputAODClassName("AliCaloTrackParticleCorrelation");
  
  //Set Histograms name tag, bins and ranges
  ana->AddToHistogramsName(Form("AnaPhoton_TM%d_",tm));
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug) ; // see method below
  
  if(ana->GetFirstSMCoveredByTRD() > 0)
    printf("AddTaskGammaHadronCorrelation() >>> Set first SM covered by TRD, SM=%d <<< year %d \n", ana->GetFirstSMCoveredByTRD(),year);
  
  // Number of particle type MC histograms
  ana->FillNOriginHistograms (17); // 18 max
  ana->FillNPrimaryHistograms(6); // 6 max
  
  return ana;
}

AliAnaPi0EbE* ConfigurePi0EbEAnalysis(TString particle,      Int_t  analysis,
                                      Bool_t useSSIso,       Bool_t useAsy,
                                      TString col,           Bool_t simulation,
                                      TString calorimeter,   Int_t  year,  Int_t tm,
                                      Bool_t  printSettings, Int_t debug           )
{
  // Configuration of pi0 event by event selection
  
  AliAnaPi0EbE *ana = new AliAnaPi0EbE();
  
  ana->SetDebug(debug);
  
  ana->SetAnalysisType((AliAnaPi0EbE::anaTypes)analysis);
  TString opt = "";
  if(analysis==AliAnaPi0EbE::kIMCaloTracks) opt = "Conv";
  if(analysis==AliAnaPi0EbE::kSSCalo)       opt = "SS";
  
  ana->SwitchOffAllNLMHistoFill();
  ana->SwitchOffSelectedClusterHistoFill();
  
  ana->SwitchOffFillWeightHistograms();
  //if(!simulation) ana->SwitchOnFillPileUpHistograms();
  //if(!kTime && !simulation) ana->SwitchOnFillEMCALBCHistograms();
  
  if(tm) ana->SwitchOnTrackMatchRejection() ;
  else   ana->SwitchOffTrackMatchRejection() ;
  ana->SwitchOffTMHistoFill() ;
  
  ana->SetCalorimeter(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetCalorimeter(calo);
  }
  
  // Branch AOD settings
  ana->SetOutputAODName(Form("%s%sTrigger_%s",particle.Data(), opt.Data(), kAnaGammaHadronCorr.Data()));
  printf("***Out branch %s***\n",ana->GetOutputAODName().Data());
  ana->SetOutputAODClassName("AliCaloTrackParticleCorrelation");
  
  if(analysis == AliAnaPi0EbE::kIMCaloTracks) ana->SetInputAODGammaConvName("PhotonsCTS");
  
  //Set Histograms name tag, bins and ranges
  
  ana->AddToHistogramsName(Form("Ana%s%sEbE_TM%d_",particle.Data(),opt.Data(),tm));
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug); // see method below
  
  if(analysis!=AliAnaPi0EbE::kSSCalo)
  {
    ana->SetInputAODName(Form("PhotonTrigger_%s",kAnaGammaHadronCorr.Data()));
    
    ana->SetM02CutForInvMass(0.1,0.35); // Loose SS cut
    
    ana->SwitchOnSelectPairInIsolationCone();
    ana->SetR(0.4);
    ana->SetIsolationCandidateMinPt(5);
    
    if(useSSIso)
    {
      ana->SwitchOnSelectIsolatedDecay();
      ana->AddToHistogramsName(Form("Ana%s%sEbEIsoDecay_TM%d_",particle.Data(),opt.Data(),tm));
      ana->SetOutputAODName(Form("%s%sIsoDecayTrigger_%s",particle.Data(), opt.Data(), kAnaGammaHadronCorr.Data()));
    }
    
    if ( calorimeter.Contains("CAL") && !simulation ) ana->SetPairTimeCut(100);
    
    AliNeutralMesonSelection *nms = ana->GetNeutralMesonSelection();
    nms->SetParticle(particle);
    
    //****
    nms->SetInvMassCutMaxParameters(0,0,0); // Overrule the setting in SetParticle for Pi0 option
    //****
    
    // Tighten a bit mass cut with respect to default window
    if(particle=="Pi0") nms->SetInvMassCutRange(0.110,0.160);
    if(particle=="Eta") nms->SetInvMassCutRange(0.520,0.580);
    
    //if(!particle.Contains("SideBand")) nms->SwitchOnAngleSelection();
    //else nms->SwitchOnAngleSelection();
    
    nms->SwitchOffAngleSelection();
    
    if(particle.Contains("Pi0SideBand")) // For pi0, do not consider left band
      nms->SetSideBandCutRanges(-1,0,0.190,0.240);
    
    if(particle.Contains("EtaSideBand")) // For pi0, do not consider left band
      nms->SetSideBandCutRanges(0.410,0.470,0.620,0.680);
    
    nms->KeepNeutralMesonSelectionHistos(kTRUE);
    //nms->SetAngleMaxParam(2,0.2);
    nms->SetHistoERangeAndNBins(0, 20, 80) ;
    //nms->SetHistoIMRangeAndNBins(0, 1, 400);
  }
  else  
  {
    // cluster splitting settings
    ana->SetMinEnergy(6);
    ana->SetMaxEnergy(100.);
    
    ana->SetNLMMinEnergy(0, 10);
    ana->SetNLMMinEnergy(1, 6);
    ana->SetNLMMinEnergy(2, 6);
    
    // NLM cut, used in all, exclude clusters with more than 2 maxima
    ana->SetNLMCut(1, 2) ;
    
    //
    ana->SetMinDistanceToBadChannel(2, 4, 6);
    ana->SwitchOnSplitClusterDistToBad();
    ana->SetTimeCut(-1e10,1e10); // Open time cut
    
    AliCaloPID* caloPID = ana->GetCaloPID();
    
    // Track matching
    // tm = 1, fixed cuts
    caloPID->SetEMCALDEtaCut(0.025);
    caloPID->SetEMCALDPhiCut(0.030);
    
    // pT track dependent cuts
    if(tm > 1) caloPID->SwitchOnEMCTrackPtDepResMatching();

    caloPID->SetSplitWidthSigma(3); // cut at 3 sigma of the mean pi0 peak.
    
    if(!useSSIso)
    {
      printf("Do not apply SS cut on merged pi0 analysis \n");
      caloPID->SwitchOffSplitShowerShapeCut() ;
      ana->AddToHistogramsName(Form("Ana%s%sEbE_OpenSS_TM%d_",particle.Data(),opt.Data(),tm));
      ana->SetOutputAODName(Form("%s%sTrigger_%s_OpenSS",particle.Data(), opt.Data(), kAnaGammaHadronCorr.Data()));
      caloPID->SetClusterSplittingM02Cut(0.1,10);
    }
    else
    {
      caloPID->SetClusterSplittingM02Cut(0.3,4); // Do the selection in the analysis class and not in the PID method to fill SS histograms
      caloPID->SwitchOnSplitShowerShapeCut() ;
    }
    
    if(useAsy)
    {
      caloPID->SwitchOnSplitAsymmetryCut() ;
      ana->GetCaloPID()->SetSubClusterEnergyMinimum(0,2);
      ana->GetCaloPID()->SetSubClusterEnergyMinimum(1,0.5);
      ana->GetCaloPID()->SetSubClusterEnergyMinimum(2,0.5);
    }
    else
    {
      caloPID->SwitchOffSplitAsymmetryCut() ;
      if(!useSSIso)
      {
        ana->AddToHistogramsName(Form("Ana%s%sEbE_OpenSS_OpenAsy_TM%d_",particle.Data(),opt.Data(),tm));
        ana->SetOutputAODName(Form("%s%sTrigger_%s_OpenSS_OpenAsy",particle.Data(), opt.Data(), kAnaGammaHadronCorr.Data()));
      }
      else
      {
        ana->AddToHistogramsName(Form("Ana%s%sEbE_OpenAsy_TM%d_",particle.Data(),opt.Data(),tm));
        ana->SetOutputAODName(Form("%s%sTrigger_%s_OpenAsy",particle.Data(), opt.Data(), kAnaGammaHadronCorr.Data()));
      }
    }
    
    // For Pi0 only if  SwitchOnSimpleSplitMassCut()
    caloPID->SetPi0MassRange(0.10, 0.18);
    caloPID->SetEtaMassRange(0.50, 0.60);
    caloPID->SetPhotonMassRange(0.00, 0.08);
    
    caloPID->SetClusterSplittingMinNCells(6);
    
    //caloPID->SetSplitEnergyFractionMinimum(0, 0.95);
    //caloPID->SetSplitEnergyFractionMinimum(1, 0.95);
    //caloPID->SetSplitEnergyFractionMinimum(2, 0.8);
    
    if(col=="PbPb" || kAnaGammaHadronCorr.Contains("150"))
    {
      caloPID->SetClusterSplittingMinNCells(4);
      //caloPID->SetPi0MassShiftHighECell(0.005);
    }
  }
  
  return  ana;
}

AliAnaParticleIsolation* ConfigureIsolationAnalysis(TString particle,      Int_t  leading,
                                                    Int_t   partInCone,    Int_t   thresType,
                                                    Float_t cone,          Float_t pth,        Bool_t multi,
                                                    TString col,           Bool_t  simulation,
                                                    TString calorimeter,   Int_t   year,       Int_t tm,
                                                    Bool_t  printSettings, Int_t   debug                      )
{
  AliAnaParticleIsolation *ana = new AliAnaParticleIsolation();
  
  ana->SetDebug(debug);
  
  ana->SetMinPt(5);
  ana->SetCalorimeter(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetCalorimeter(calo);
  }
  
  ana->SwitchOffUEBandSubtractionHistoFill();
  ana->SwitchOffCellHistoFill() ;
  
  ana->SwitchOffLeadingOnly();
  ana->SwitchOffCheckNeutralClustersForLeading();
  if( leading > 0 )   ana->SwitchOnLeadingOnly();
  if( leading == 2 ||
     leading == 4)   ana->SwitchOnCheckNeutralClustersForLeading();
  
  // MC
  ana->SwitchOnPrimariesInConeSelection();
  ana->SwitchOnPrimariesPi0DecayStudy() ;
  
  if(particle.Contains("Photon"))
  {
    ana->SwitchOnDecayTaggedHistoFill() ;
    ana->SetNDecayBits(5);
    ana->SwitchOnSSHistoFill();
  }
  else
  {
    ana->SwitchOffSSHistoFill();
  }
  
  ana->SwitchOnPtTrigBinHistoFill();
  ana->SetNPtTrigBins(6);
  //ana->SetPtTrigLimits(0,8); ana->SetPtTrigLimits(1,12); ana->SetPtTrigLimits(2,16); ana->SetPtTrigLimits(3,25);
  
  ana->SwitchOnBackgroundBinHistoFill();
  ana->SetNBackgroundBins(11);
  //ana->SetBackgroundLimits(0,0); ana->SetBackgroundLimits(1,0.2); ana->SetBackgroundLimits(2,3); ana->SetBackgroundLimits(3,0.4);
    
  if(!tm)  ana->SwitchOnTMHistoFill();
  else     ana->SwitchOffTMHistoFill();
  
  //if(!simulation) ana->SwitchOnFillPileUpHistograms();
  
  ana->SwitchOffRealCaloAcceptance();
  ana->SwitchOnFiducialCut();
  
  // Avoid borders of calorimeter
  if      ( calorimeter == "EMCAL" ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60,  86, 174) ;
  else if ( calorimeter == "DCAL"  ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60, 266, 314) ; 
  else if ( calorimeter == "PHOS"  ) ana->GetFiducialCut()->SetSimplePHOSFiducialCut (0.10, 266, 314) ; 
  
  // Same Eta as EMCal, cut in phi if EMCAL was triggering
  if(particle=="Hadron"  || particle.Contains("CTS"))
  {
    //if(trigger.Contains("EMC"))
    //  ana->GetFiducialCut()->SetSimpleCTSFiducialCut  (0.6, 260, 360) ;
    //else
    ana->GetFiducialCut()->SetSimpleCTSFiducialCut  (0.6, 0, 360) ;
  }
  
  // Branch AOD settings
  
  ana->SetInputAODName(Form("%sTrigger_%s",particle.Data(),kAnaGammaHadronCorr.Data()));
  ana->SetAODObjArrayName(Form("IC%sTrigger_%s_R%1.1f_ThMin%1.1f",particle.Data(),kAnaGammaHadronCorr.Data(),cone,pth));
  
  //
  // Do settings for main isolation cut class
  //
  AliIsolationCut * ic =  ana->GetIsolationCut();
  ic->SetDebug(debug);
  ic->SetParticleTypeInCone(partInCone);
  ic->SetICMethod(thresType);
  ic->SetPtFraction(0.1);
  ic->SetPtThreshold(0.5); // default, change in next lines
  ic->SetSumPtThreshold(1.0); // default, change in next lines
  
  if(cone > 0 && pth > 0)
  {
    ic->SetConeSize(cone);
    ic->SetPtThresholdMax(10000);
    
    if(thresType == AliIsolationCut::kPtThresIC)
    {
      printf("*** Iso *** PtThresMin = %1.1f GeV/c *** R = %1.1f ***\n",pth,cone);
      ic->SetPtThreshold(pth);
    }
    
    if(thresType == AliIsolationCut::kSumPtIC)
    {
      printf("*** Iso *** SumPtMin = %1.1f GeV/c *** R = %1.1f ***\n",pth,cone);
      ic->SetSumPtThreshold(pth);
    }
  }
  else
  {
    if(col=="pp")
    {
      ic->SetPtThreshold(0.5);
      ic->SetSumPtThreshold(1.0) ;
      ic->SetConeSize(0.4);
    }
    if(col=="PbPb")
    {
      ic->SetPtThreshold(3.);
      ic->SetSumPtThreshold(3.0) ;
      ic->SetConeSize(0.3);
    }
  }
  
  
  // Do or not do isolation with previously produced AODs.
  // No effect if use of SwitchOnSeveralIsolation()
  ana->SwitchOffReIsolation();
  
  // Multiple IC
  if(multi)
  {
    ic->SetConeSize(1.);    // Take all for first iteration
    ic->SetPtThreshold(100);// Take all for first iteration
    ana->SwitchOnSeveralIsolation() ;
    ana->SetAODObjArrayName(Form("MultiIC%sTM%d",particle.Data(),tm));
    
    ana->SetNCones(3);
    ana->SetNPtThresFrac(2);
    ana->SetConeSizes(0,0.3);       ana->SetConeSizes(1,0.4);       ana->SetConeSizes(2,0.5);
    ana->SetPtThresholds(0, 0.5);   ana->SetPtThresholds(1, 1);     ana->SetPtThresholds(2, 1.5);  ana->SetPtThresholds(3, 2);
    ana->SetPtFractions (0, 0.05) ; ana->SetPtFractions (1, 0.1);   ana->SetPtFractions (2, 0.2) ;  ana->SetPtFractions (3, 0.3) ;
    ana->SetSumPtThresholds(0, 0.5) ; ana->SetSumPtThresholds(1, 1) ; ana->SetSumPtThresholds(2, 1.5);  ana->SetSumPtThresholds(3, 2)  ;
    //ana->SetPtThresholds(0, 0.5);
    
    ana->SwitchOffTMHistoFill();
    ana->SwitchOffSSHistoFill();
  }
  else
    ana->SwitchOffSeveralIsolation() ;
  
  AliCaloPID* caloPID = ana->GetCaloPID();
 
  // Track matching 
  // tm = 1, fixed cuts
  caloPID->SetEMCALDEtaCut(0.025);
  caloPID->SetEMCALDPhiCut(0.030);
  
  // pT track dependent cuts
  if(tm > 1) caloPID->SwitchOnEMCTrackPtDepResMatching();

  //Set Histograms name tag, bins and ranges
  
  if(!multi) ana->AddToHistogramsName(Form("AnaIsol%s_TM%d_",particle.Data(),tm));
  else       ana->AddToHistogramsName(Form("AnaMultiIsol%s_TM%d_",particle.Data(),tm));
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug); // see method below
  
  if(particle=="Hadron"  || particle.Contains("CTS"))
  {
    ana->GetHistogramRanges()->SetHistoPhiRangeAndNBins(0, TMath::TwoPi(), 200) ;
    ana->GetHistogramRanges()->SetHistoEtaRangeAndNBins(-1.5, 1.5, 300) ;
  }
  
  if(printSettings) ic ->Print("");
  
  return ana;
}


AliAnaParticleHadronCorrelation* ConfigureHadronCorrelationAnalysis(TString particle,      Int_t   leading,
                                                                    Bool_t  bIsolated,     Float_t shshMax,
                                                                    Int_t partInCone,      Int_t   thresType,
                                                                    Float_t cone,          Float_t pth,      Bool_t mixOn,
                                                                    TString col,           Bool_t  simulation,
                                                                    TString calorimeter,   Int_t   year,     Int_t tm,
                                                                    Bool_t  printSettings, Int_t   debug                      )
{
  AliAnaParticleHadronCorrelation *ana = new AliAnaParticleHadronCorrelation();
  
  ana->SetTriggerPtRange(5,100);
  ana->SetAssociatedPtRange(0.2,100);
  ana->SetDeltaPhiCutRange  (TMath::DegToRad()*120.,TMath::DegToRad()*240.);
  
  // Underlying event
  ana->SetUeDeltaPhiCutRange(TMath::DegToRad()*60. ,TMath::DegToRad()*120.);
  ana->SwitchOnSeveralUECalculation();
  
  ana->SwitchOffAbsoluteLeading();  // Select trigger leading particle of all the selected tracks
  ana->SwitchOffNearSideLeading();  // Select trigger leading particle of all the particles at +-90 degrees, default
  ana->SwitchOffCheckNeutralClustersForLeading();
  
  if(leading >  0 && leading <  3 ) ana->SwitchOnAbsoluteLeading();
  if(leading >  2 )                 ana->SwitchOnNearSideLeading();
  if(leading == 2 || leading == 4 ) ana->SwitchOnCheckNeutralClustersForLeading();
  
  ana->SwitchOffFillPtImbalancePerPtABinHistograms();
  ana->SwitchOffCorrelationVzBin() ;
  ana->SwitchOffFillEtaGapHistograms();
  
  ana->SwitchOffFillHighMultiplicityHistograms();
  
  ana->SwitchOffPi0TriggerDecayCorr();
  if(particle.Contains("Photon"))
  {
    ana->SwitchOnDecayTriggerDecayCorr();
    ana->SetNDecayBits(5);
    printf("**** SET M02 limits in correlation task *** \n");
    ana->SetM02Cut(0.10,shshMax);
    ana->SwitchOnInvariantMassHistograms();
    ana->SwitchOnBackgroundBinsPtInConeHistograms();
  }
  
  ana->SetMCGenType(0,7);
  
  ana->SwitchOffLeadHadronSelection(); // Open cuts, just fill histograms
  ana->SwitchOnFillLeadHadronHistograms();
  ana->SwitchOnBackgroundBinsPtInConeHistograms();
  ana->SwitchOnBackgroundBinsTaggedDecayPtInConeHistograms();
  ana->SetLeadHadronPhiCut(TMath::DegToRad()*130, TMath::DegToRad()*230.);
  ana->SetLeadHadronPtCut(0.5, 1000);
  
  // if triggering on PHOS and EMCAL is on
  ana->SwitchOffNeutralCorr(); // Do only correlation with TPC
  //ana->SetPi0AODBranchName("Pi0EMCAL_TrigEMC7_Cl_TM1");
  
  ana->SwitchOffHMPIDCorrelation();
  
  ana->SwitchOffFillBradHistograms();
  
  //if(!simulation) ana->SwitchOnFillPileUpHistograms();
  
  ana->SetNAssocPtBins(8);
  ana->SetAssocPtBinLimit(0, 1) ;
  ana->SetAssocPtBinLimit(1, 2) ;
  ana->SetAssocPtBinLimit(2, 3) ;
  ana->SetAssocPtBinLimit(3, 4) ;
  ana->SetAssocPtBinLimit(4, 5) ;
  ana->SetAssocPtBinLimit(5, 8) ;
  ana->SetAssocPtBinLimit(6, 10) ;
  ana->SetAssocPtBinLimit(7, 100);
  
  ana->SelectIsolated(bIsolated); // do correlation with isolated photons
  
  // Mixing with own pool
  if(mixOn)
  {
    ana->SwitchOnOwnMix();
    ana->SwitchOnFillNeutralInMixedEvent();
    
    if(bIsolated)
    {
      //Do settings for main isolation cut class
      AliIsolationCut * ic =  ana->GetIsolationCut();
      ic->SetDebug(debug);
      
      if(cone >0 && pth > 0)
      {
        printf("*** Correl *** PtThres = %1.1f GeV/c *** R = %1.1f ***\n",pth,cone);
        ic->SetPtThreshold(pth);
        ic->SetConeSize(cone);
      }
      else
      {
        if(col=="pp")
        {
          ic->SetPtThreshold(0.5);
          ic->SetConeSize(0.4);
        }
        if(col=="PbPb")
        {
          ic->SetPtThreshold(3.);
          //ic->SetPtThreshold(1.);
          ic->SetConeSize(0.3);
        }
      }
      
      ic->SetPtFraction(0.1);
      ic->SetSumPtThreshold(1.0) ;
      ic->SetParticleTypeInCone(partInCone);
      ic->SetICMethod(thresType);
    }
  }
  else
    ana->SwitchOffOwnMix();
  
  ana->SetNZvertBin(20);
  
  if(col=="pp")
  {
    ana->SetNMaxEvMix(100);
    ana->SwitchOnTrackMultBins();
    ana->SetNTrackMultBin(10);
    ana->SetNRPBin(1);
  }
  else
  {
    ana->SetNMaxEvMix(10);
    ana->SwitchOffTrackMultBins(); // centrality bins
    ana->SetNCentrBin(12);
    ana->SetNRPBin(3);
    if(kAnaGammaHadronCorr.Contains("60_90"))
    {
      printf("*** Set mixing for peripheral\n");
      ana->SetNMaxEvMix(50);
      ana->SetNCentrBin(2);
    }
  }
  
  ana->SwitchOnFiducialCut();
  
  // Avoid borders of calorimeter, same as for isolation
  if      ( calorimeter == "EMCAL" ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60,  86, 174) ;
  else if ( calorimeter == "DCAL"  ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60, 266, 314) ; 
  else if ( calorimeter == "PHOS"  ) ana->GetFiducialCut()->SetSimplePHOSFiducialCut (0.10, 266, 314) ; 
  
  // Input / output delta AOD settings
  
  ana->SetInputAODName(Form("%sTrigger_%s",particle.Data(),kAnaGammaHadronCorr.Data()));
  ana->SetAODObjArrayName(Form("%sHadronCorrIso%dTrigger_%s",particle.Data(),bIsolated,kAnaGammaHadronCorr.Data()));
  //ana->SetAODNamepTInConeHisto(Form("IC%s_%s_R%1.1f_ThMin%1.1f"           ,particle.Data(),kAnaGammaHadronCorr.Data(),cone,pth));
  
  //Set Histograms name tag, bins and ranges
  
  ana->AddToHistogramsName(Form("Ana%sHadronCorr_Iso%d_TM%d_",particle.Data(),bIsolated,tm));
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug); // see method below
  
  if(particle=="Hadron"  || particle.Contains("CTS"))
  {
    ana->GetHistogramRanges()->SetHistoPhiRangeAndNBins(0, TMath::TwoPi(), 200) ;
    ana->GetHistogramRanges()->SetHistoEtaRangeAndNBins(-1.5, 1.5, 300) ;
  }
  
  return ana;
}

AliAnaChargedParticles* ConfigureChargedAnalysis( Bool_t simulation, Bool_t printSettings, Int_t   debug )
{
  AliAnaChargedParticles *ana = new AliAnaChargedParticles();
  
  ana->SetDebug(debug);
  
  // selection cuts
  
  ana->SetMinPt(0.2);
  ana->SwitchOnFiducialCut();
  ana->GetFiducialCut()->SetSimpleCTSFiducialCut(0.8, 0, 360) ; //more restrictive cut in reader and after in isolation
  
  ana->SwitchOffFillVertexBC0Histograms();
  
  ana->SwitchOffFillPileUpHistograms();
  ana->SwitchOffFillTrackBCHistograms();
  
  // Branch AOD settings
  
  ana->SetOutputAODName(Form("HadronTrigger_%s",kAnaGammaHadronCorr.Data()));
  ana->SetOutputAODClassName("AliCaloTrackParticle"); // use if no correlation done
  
  //Set Histograms name tag, bins and ranges
  
  ana->AddToHistogramsName("AnaHadrons_");
  
  SetAnalysisCommonParameters(ana,"CTS",2012,"pp",simulation,printSettings,debug); // see method below
  
  return ana;
}

AliAnaCalorimeterQA* ConfigureQAAnalysis(TString col,           Bool_t  simulation,
                                         TString calorimeter,   Int_t   year,
                                         Bool_t  printSettings, Int_t   debug      )
{
  AliAnaCalorimeterQA *ana = new AliAnaCalorimeterQA();
  
  ana->SetCalorimeter(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetCalorimeter(calo);
  }
  
  ana->SetTimeCut(-1e10,1e10); // Open time cut
  
  ana->SwitchOffCorrelation(); // make sure you switch in the reader PHOS and EMCAL cells and clusters if option is ON
  
  ana->SwitchOffRealCaloAcceptance();
  
  ana->SwitchOffFiducialCut();
  ana->SwitchOffFillAllTH3Histogram();
  ana->SwitchOffFillAllPositionHistogram();
  ana->SwitchOffFillAllPositionHistogram2();
  ana->SwitchOffStudyBadClusters() ;
  ana->SwitchOffFillAllCellTimeHisto() ;
  
  ana->SwitchOnFillAllTrackMatchingHistogram();
  
  ana->AddToHistogramsName("QA_"); // Begining of histograms name
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug); // see method below
  
  return ana;
}

AliAnaGeneratorKine* ConfigureGenKineAnalysis(Int_t   thresType,     Float_t cone,
                                              Float_t pth,
                                              TString col,           Bool_t  simulation,
                                              TString calorimeter,   Int_t   year,
                                              Bool_t  printSettings, Int_t   debug       )
{
  AliAnaGeneratorKine *ana = new AliAnaGeneratorKine();
  
  // Trigger detector, acceptance and pT cut
  ana->SetTriggerDetector(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetTriggerDetector(calo);
  }
  
  ana->SetMinPt(2); // Trigger photon, pi0 minimum pT
  if      ( calorimeter == "EMCAL" ) ana->GetFiducialCutForTrigger()->SetSimpleEMCALFiducialCut(0.60,  86, 174) ;
  else if ( calorimeter == "DCAL"  ) ana->GetFiducialCutForTrigger()->SetSimpleEMCALFiducialCut(0.60, 266, 314) ; 
  else if ( calorimeter == "PHOS"  ) ana->GetFiducialCutForTrigger()->SetSimplePHOSFiducialCut (0.10, 266, 314) ; 
  
  // Particles associated to trigger or isolation cone acceptance and pT cut
  ana->SetCalorimeter(calorimeter);
  if(calorimeter == "DCAL") 
  {
    TString calo = "EMCAL";
    ana->SetCalorimeter(calo);
  }
  
  ana->SetMinChargedPt(0.2);
  ana->SetMinNeutralPt(0.3);
  
  if      ( calorimeter == "EMCAL" ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.70,  80, 174) ;
  else if ( calorimeter == "DCAL"  ) ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.70, 260, 327) ; 
  else if ( calorimeter == "PHOS"  ) ana->GetFiducialCut()->SetSimplePHOSFiducialCut (0.12, 250, 320) ;   
  ana->GetFiducialCut()->SetSimpleCTSFiducialCut(0.9, 0, 360);
  
  // Isolation paramters
  AliIsolationCut * ic = ana->GetIsolationCut();
  ic->SetDebug(debug);
  ic->SetPtThreshold(pth);
  ic->SetConeSize(cone);
  ic->SetSumPtThreshold(1.0) ;
  ic->SetICMethod(thresType);
  
  ana->AddToHistogramsName("AnaGenKine_");
  
  SetAnalysisCommonParameters(ana,calorimeter,year,col,simulation,printSettings,debug); // see method below
  
  return ana;
}


void SetAnalysisCommonParameters(AliAnaCaloTrackCorrBaseClass* ana,
                                 TString calorimeter,   Int_t  year,
                                 TString col,           Bool_t simulation,
                                 Bool_t  printSettings, Int_t  debug)
{
  //
  // Histograms ranges
  //
  AliHistogramRanges* histoRanges = ana->GetHistogramRanges();
  
  histoRanges->SetHistoPtRangeAndNBins(0, 100, 200) ; // Energy and pt histograms
  
  if(calorimeter=="EMCAL")
  {
    ana->SetFirstSMCoveredByTRD(-1);
    
    if ( year == 2010 )
    {
      histoRanges->SetHistoPhiRangeAndNBins(78*TMath::DegToRad(), 122*TMath::DegToRad(), 78) ;
      histoRanges->SetHistoXRangeAndNBins(-230,90,120); // QA
      histoRanges->SetHistoYRangeAndNBins(370,450,40);  // QA
    }
    else if ( year < 2014 )
    {
      histoRanges->SetHistoPhiRangeAndNBins(78*TMath::DegToRad(), 182*TMath::DegToRad(), 104) ;
      histoRanges->SetHistoXRangeAndNBins(-460,90,200); // QA
      histoRanges->SetHistoYRangeAndNBins(100,450,100); // QA  
      
      if     (year == 2011) ana->SetFirstSMCoveredByTRD( 6);
      else if(year == 2012 ||
              year == 2013) ana->SetFirstSMCoveredByTRD( 4);
    }
    else // Run2
    {
      histoRanges->SetHistoPhiRangeAndNBins(78*TMath::DegToRad(), 189*TMath::DegToRad(), 111) ;
      histoRanges->SetHistoXRangeAndNBins(-460,460,230); // QA, revise
      histoRanges->SetHistoYRangeAndNBins(-450,450,225); // QA, revise
    }
    
    histoRanges->SetHistoEtaRangeAndNBins(-0.72, 0.72, 144) ;
  }
  else if(calorimeter=="DCAL")
  {
    histoRanges->SetHistoPhiRangeAndNBins(260*TMath::DegToRad(), 327*TMath::DegToRad(), 67) ;
    histoRanges->SetHistoEtaRangeAndNBins(-0.72, 0.72, 144) ;
    histoRanges->SetHistoXRangeAndNBins(-460,460,230); // QA, revise
    histoRanges->SetHistoYRangeAndNBins(-450,450,225); // QA, revise
    ana->SetFirstSMCoveredByTRD( 0);
  } 
  else if(calorimeter=="PHOS")
  {
    histoRanges->SetHistoPhiRangeAndNBins(250*TMath::DegToRad(), 320*TMath::DegToRad(), 70) ;
    histoRanges->SetHistoEtaRangeAndNBins(-0.13, 0.13, 130) ;
  }
  else if(calorimeter=="CTS")
  {
    ana->GetHistogramRanges()->SetHistoPhiRangeAndNBins(0, TMath::TwoPi(), 200) ;
    ana->GetHistogramRanges()->SetHistoEtaRangeAndNBins(-1.5, 1.5, 300) ;
  }
  
  histoRanges->SetHistoShowerShapeRangeAndNBins(-0.1, 4.9, 500);
  
  // Invariant mass histo
  histoRanges->SetHistoMassRangeAndNBins(0., 1., 200) ;
  histoRanges->SetHistoAsymmetryRangeAndNBins(0., 1. , 100) ;
  
  // check if time calibration is on
  //histoRanges->SetHistoTimeRangeAndNBins(-1000.,1000,1000);
  histoRanges->SetHistoTimeRangeAndNBins(-400.,400,400);
  histoRanges->SetHistoDiffTimeRangeAndNBins(-200, 200, 800);
  
  // track-cluster residuals
  histoRanges->SetHistoTrackResidualEtaRangeAndNBins(-0.15,0.15,300);
  histoRanges->SetHistoTrackResidualPhiRangeAndNBins(-0.15,0.15,300);
  histoRanges->SetHistodRRangeAndNBins(0.,0.15,150);//QA
  
  // QA, electron, charged
  histoRanges->SetHistoPOverERangeAndNBins(0,2.,200);
  histoRanges->SetHistodEdxRangeAndNBins(0.,200.,200);
  
  // QA
  histoRanges->SetHistoFinePtRangeAndNBins(0, 10, 200) ; // bining for fhAmpId
  histoRanges->SetHistoVertexDistRangeAndNBins(0.,500.,500);
  histoRanges->SetHistoZRangeAndNBins(-350,350,175);
  histoRanges->SetHistoRRangeAndNBins(430,460,30);
  histoRanges->SetHistoV0SignalRangeAndNBins(0,5000,500);
  histoRanges->SetHistoV0MultiplicityRangeAndNBins(0,5000,500);
  
  // QA, correlation
  if(col=="PbPb")
  {
    histoRanges->SetHistoNClusterCellRangeAndNBins(0,100,100);
    histoRanges->SetHistoNClustersRangeAndNBins(0,500,50);
    histoRanges->SetHistoTrackMultiplicityRangeAndNBins(0,2000,200);
  }
  else
  {
    histoRanges->SetHistoNClusterCellRangeAndNBins(0,50,50);
    histoRanges->SetHistoNClustersRangeAndNBins(0,50,50);
    histoRanges->SetHistoTrackMultiplicityRangeAndNBins(0,200,200);
  }
  
  // xE, zT
  histoRanges->SetHistoRatioRangeAndNBins(0.,2.,200);
  histoRanges->SetHistoHBPRangeAndNBins  (0.,10.,200);
  
  // Isolation
  histoRanges->SetHistoPtInConeRangeAndNBins(0, 50 , 250);
  histoRanges->SetHistoPtSumRangeAndNBins   (0, 100, 250);
  
  //
  // MC histograms?
  //
  if(simulation) ana->SwitchOnDataMC() ;//Access MC stack and fill more histograms, AOD MC not implemented yet.
  else           ana->SwitchOffDataMC() ;
  
  //
  // Debug
  //
  if(printSettings) ana->Print("");
  
  ana->SetDebug(debug); // 10 for lots of messages
}