#include <AliYAMLConfiguration.h>

Inheritance diagram for PWG::Tools::AliYAMLConfiguration:

Public Member Functions
	AliYAMLConfiguration (const std::string prefixString="AliEmcalCorrection", const std::string delimiterCharacter=":")

virtual	~AliYAMLConfiguration ()

Setup the configurations at various points of the analysis.
bool	Initialize ()

bool	Reinitialize ()

Add a new particular configuration under a given name.
int	AddEmptyConfiguration (const std::string &configurationName)
	Add YAML configuration at configurationFilename to available configurations. More...

int	AddConfiguration (std::string configurationFilename, std::string configurationName="")

int	AddConfiguration (const YAML::Node node, std::string configurationName="")

Get a particular configuration by index or name.
bool	DoesConfigurationExist (const int i) const

bool	DoesConfigurationExist (const std::string &name) const

const std::pair< std::string, YAML::Node > &	GetConfiguration (const int i) const

const std::pair< std::string, YAML::Node > &	GetConfiguration (const std::string &name) const

std::pair< std::string, YAML::Node > &	GetConfiguration (const int i)

std::pair< std::string, YAML::Node > &	GetConfiguration (const std::string &name)

Translate between configuration name and index.
std::string	GetConfigurationNameFromIndex (const unsigned int i) const

int	GetConfigurationIndexFromName (const std::string &name) const

Remove a particular configuration by index or name.
bool	RemoveConfiguration (const unsigned int i)

bool	RemoveConfiguration (const std::string &name)

Get a property from the available configurations
template<typename T >
bool	GetProperty (std::vector< std::string > propertyPath, const std::string &propertyName, T &property, const bool requiredProperty) const

template<typename T >
bool	GetProperty (const std::vector< std::string > propertyPath, T &property, const bool requiredProperty) const

template<typename T >
bool	GetProperty (std::string propertyName, T &property, const bool requiredProperty=true) const

Write a property to a particular configuration
template<typename T >
bool	WriteProperty (std::string propertyName, T &property, std::string configurationName="")

Write a particular configuration at a given index or name to a file.
bool	WriteConfiguration (const std::string &filename, const unsigned int i) const

bool	WriteConfiguration (const std::string &filename, const std::string &configurationName) const

bool	CompareConfigurations (const int config1, const int config2) const

bool	CompareConfigurations (const int config1, const std::string &config2) const

bool	CompareConfigurations (const std::string &config1, const std::string &config2) const

Protected Member Functions
bool	DoesFileExist (const std::string &filename) const

void	SetupReadingConfigurationFilePath (std::string &filename, const std::string &fileIdentifier) const

void	WriteConfigurationToFilePath (const std::string &localFilename, std::string filename) const

void	PrintConfiguration (std::ostream &stream, const std::pair< std::string, YAML::Node > &configPair) const

template<typename T >
unsigned int	GetConfigurationIndexFromName (const std::string &name, const std::vector< std::pair< std::string, T >> &configurations) const

bool	IsSharedValue (std::string &value) const

template<typename T >
auto	PrintRetrievedPropertyValueImpl (std::stringstream &tempMessage, const T &property, int) const -> decltype(tempMessage<< property, void())

template<typename T >
auto	PrintRetrievedPropertyValueImpl (std::stringstream &tempMessage, const std::vector< T > &property, int) const -> decltype(property.begin(), property.end(), tempMessage<< std::declval< T >(), void())

template<typename T >
void	PrintRetrievedPropertyValueImpl (std::stringstream &tempMessage, const T &property, long) const

template<typename T >
void	PrintRetrievedPropertyValue (std::stringstream &tempMessage, const T &property) const

template<typename T >
bool	GetPropertyFromNode (const YAML::Node &node, std::string propertyName, T &property) const

template<typename T >
bool	GetProperty (YAML::Node &node, YAML::Node &sharedParametersNode, const std::string &configurationName, std::string propertyName, T &property) const

template<typename T >
void	WriteValue (YAML::Node &node, std::string propertyName, T &proeprty)

Protected Attributes
std::vector< std::pair < std::string, YAML::Node > >	fConfigurations
	! Contains all YAML configurations. The first element has the highest precedence. More...

std::vector< std::pair < std::string, std::string > >	fConfigurationsStrings
	Contains all YAML configurations as strings so that they can be streamed. More...

bool	fInitialized
	True if the configurations have been initialized. More...

std::string	fPrefixString
	Contains the prefix of any names base node names which should be removed. More...

std::string	fDelimiter
	Delimiter character to separate each level of the request. More...

Print a particular configuration at a given index or name to a file.
std::string	toString (const int index=-1) const

std::ostream &	Print (std::ostream &in, const int index=-1) const

std::ostream &	Print (std::ostream &in, const std::string &configurationName) const

void	Print (Option_t *="") const

std::ostream &	operator<< (std::ostream &in, const AliYAMLConfiguration &myTask)

Detailed Description

Definition at line 101 of file AliYAMLConfiguration.h.

Constructor & Destructor Documentation

AliYAMLConfiguration::AliYAMLConfiguration	(	const std::string	prefixString = `"AliEmcalCorrection"`,
		const std::string	delimiterCharacter = `":"`
	)

Default constructor.

Parameters

[in]	prefixString	Prefix to remove when gettnig a property.
[in]	delimiterCharacter	Character that delimits between each part of the YAML path.

Definition at line 27 of file AliYAMLConfiguration.cxx.

virtual PWG::Tools::AliYAMLConfiguration::~AliYAMLConfiguration ( )

inlinevirtual

Definition at line 104 of file AliYAMLConfiguration.h.

Member Function Documentation

int AliYAMLConfiguration::AddConfiguration	(	std::string	configurationFilename,
		std::string	configurationName = `""`
	)

Add YAML configuration at a given filename to the available configurations.

Parameters

[in]	configurationFilename	Filename of the YAML configuration file to be added.
[in]	configurationName	Name of the YAML node. The node will be stored under this name.

Returns: Position of configuration if the configuration was added successfully. -1 if unsuccessful.

Definition at line 59 of file AliYAMLConfiguration.cxx.

Referenced by AddEmptyConfiguration(), AliAnalysisTaskEmcalEmbeddingHelper::AutoConfigurePtHardBins(), AliEmcalCorrectionTask::CompareToStoredConfiguration(), AliEmcalCorrectionTask::InitializeConfiguration(), and AliAnalysisTaskEmcalEmbeddingHelper::InitializeYamlConfig().

int AliYAMLConfiguration::AddConfiguration	(	const YAML::Node	node,
		std::string	configurationName = `""`
	)

Add a YAML node to the available configurations.

Parameters

[in]	node	YAML node to be added.
[in]	configurationName	Name of the YAML node. The node will be stored under this name.

Returns: Position of configuration if the configuration was added successfully. -1 if unsuccessful.

Definition at line 89 of file AliYAMLConfiguration.cxx.

int AliYAMLConfiguration::AddEmptyConfiguration ( const std::string & configurationName )

Add YAML configuration at configurationFilename to available configurations.

Create an empty YAML node and adds it to the available configurations.

Parameters

[in] configurationName Name of the YAML node. The node will be stored under this name.

Returns: Position of configuration if the configuration was added successfully. -1 if unsuccessful.

Definition at line 44 of file AliYAMLConfiguration.cxx.

Referenced by AliAnalysisTaskEmcalEmbeddingHelper::AutoConfigurePtHardBins().

bool AliYAMLConfiguration::CompareConfigurations	(	const int	configIndex1,
		const int	configIndex2
	)		const

Compare two configurations to see if they are identical.

Parameters

[in]	configIndex1	Index of the first configuration.
[in]	configIndex2	Index of the second configuration.

Returns: True if the configurations are the same.

Definition at line 183 of file AliYAMLConfiguration.cxx.

Referenced by AliEmcalCorrectionTask::CompareToStoredConfiguration().

bool PWG::Tools::AliYAMLConfiguration::CompareConfigurations	(	const int	config1,
		const std::string &	config2
	)		const

inline

Definition at line 181 of file AliYAMLConfiguration.h.

Referenced by CompareConfigurations().

bool PWG::Tools::AliYAMLConfiguration::CompareConfigurations	(	const std::string &	config1,
		const std::string &	config2
	)		const

inline

Definition at line 182 of file AliYAMLConfiguration.h.

Referenced by CompareConfigurations().

bool PWG::Tools::AliYAMLConfiguration::DoesConfigurationExist ( const int i ) const

inline

Definition at line 126 of file AliYAMLConfiguration.h.

Referenced by CompareConfigurations(), AliEmcalCorrectionTask::DetermineComponentsToExecute(), AliEmcalCorrectionTask::GetPropertyNamesFromNode(), AliEmcalCorrectionTask::PrintConfiguration(), and WriteConfiguration().

bool PWG::Tools::AliYAMLConfiguration::DoesConfigurationExist ( const std::string & name ) const

inline

Definition at line 127 of file AliYAMLConfiguration.h.

Referenced by DoesConfigurationExist().

bool AliYAMLConfiguration::DoesFileExist ( const std::string & filename ) const

inlineprotected

Checks if a file exists. This is done inline to make it efficient. See: https://stackoverflow.com/a/19841704

Parameters

filename String containing the filename of the file to check.

Returns: True if the file exists.

Definition at line 242 of file AliYAMLConfiguration.cxx.

Referenced by AddConfiguration().

const std::pair<std::string, YAML::Node>& PWG::Tools::AliYAMLConfiguration::GetConfiguration ( const int i ) const

inline

Definition at line 128 of file AliYAMLConfiguration.h.

Referenced by CompareConfigurations(), AliEmcalCorrectionTask::DetermineComponentsToExecute(), AliEmcalCorrectionTask::GetPropertyNamesFromNode(), and AliEmcalCorrectionTask::PrintConfiguration().

const std::pair<std::string, YAML::Node>& PWG::Tools::AliYAMLConfiguration::GetConfiguration ( const std::string & name ) const

inline

Definition at line 129 of file AliYAMLConfiguration.h.

Referenced by GetConfiguration().

std::pair<std::string, YAML::Node>& PWG::Tools::AliYAMLConfiguration::GetConfiguration ( const int i )

inline

Definition at line 130 of file AliYAMLConfiguration.h.

std::pair<std::string, YAML::Node>& PWG::Tools::AliYAMLConfiguration::GetConfiguration ( const std::string & name )

inline

Definition at line 131 of file AliYAMLConfiguration.h.

Referenced by GetConfiguration().

int PWG::Tools::AliYAMLConfiguration::GetConfigurationIndexFromName ( const std::string & name ) const

inline

Definition at line 138 of file AliYAMLConfiguration.h.

Referenced by CompareConfigurations(), DoesConfigurationExist(), GetConfiguration(), GetConfigurationIndexFromName(), Print(), RemoveConfiguration(), WriteConfiguration(), and WriteProperty().

template<typename T >

unsigned int AliYAMLConfiguration::GetConfigurationIndexFromName	(	const std::string &	name,
		const std::vector< std::pair< std::string, T >> &	configurations
	)		const

protected

Get the index of the configuration given the configuration name. If the same name is used multiple times, then the first instance will be returned.

Parameters

[in]	name	Name of the configuration.
[in]	configurations	Configurations to search through (could contain YAML nodes, or the string copies).

Returns: Index of the configuration, or -1 if not found.

Definition at line 638 of file AliYAMLConfiguration.h.

std::string PWG::Tools::AliYAMLConfiguration::GetConfigurationNameFromIndex ( const unsigned int i ) const

inline

Definition at line 137 of file AliYAMLConfiguration.h.

template<typename T >

bool AliYAMLConfiguration::GetProperty	(	std::vector< std::string >	propertyPath,
		const std::string &	propertyName,
		T &	property,
		const bool	requiredProperty
	)		const

Helper function for main retrieval function. It automatically adds the property name to the end of the property path. By doing so, it allows the user to specify a general property path and then vary the property name between function calls.

Parameters

[in]	propertyPath	Path to the property in the YAML file.
[in]	propertyName	Name of the property to be retrieved.
[out]	property	Contains the retrieved property.
[in]	requiredProperty	True if the property is required

Returns: True if the property was set successfully

Definition at line 345 of file AliYAMLConfiguration.h.

Referenced by AliEmcalCorrectionTask::AddContainer(), AliEmcalCorrectionTask::AddContainersToComponent(), AliAnalysisTaskEmcalEmbeddingHelper::AutoConfigurePtHardBins(), AliEmcalCorrectionTask::CreateInputObjects(), AliEmcalCorrectionTask::DetermineComponentsToExecute(), AliEmcalCorrectionComponent::GetProperty(), GetProperty(), AliEmcalCorrectionComponent::Initialize(), AliAnalysisTaskEmcalEmbeddingHelper::InitializeYamlConfig(), AliEmcalCorrectionTask::SetupCellsInfo(), and AliEmcalCorrectionTask::SetupContainer().

template<typename T >

bool AliYAMLConfiguration::GetProperty	(	const std::vector< std::string >	propertyPath,
		T &	property,
		const bool	requiredProperty
	)		const

Helper function for main retrieval function. Each value in the property path will be joined together, separated by the delimiter set in the configuration class.

Parameters

[in]	propertyPath	Path to the property in the YAML file.
[out]	property	Contains the retrieved property.
[in]	requiredProperty	True if the property is required

Returns: True if the property was set successfully

Definition at line 362 of file AliYAMLConfiguration.h.

template<typename T >

bool AliYAMLConfiguration::GetProperty	(	std::string	propertyName,
		T &	property,
		const bool	requiredProperty = `true`
	)		const

Main general function to get a property from a set of YAML configuration files. It first calls checks the user configuration, and then if the property is not found, it then checks the default configuration. If the property is required but it is not found, a fatal error is thrown.

Parameters

[in]	propertyName	Name of the property to retrieve
[out]	property	Contains the retrieved property
[in]	requiredProperty	True if the property is required

Returns: True if the property was set successfully

Definition at line 392 of file AliYAMLConfiguration.h.

template<typename T >

bool AliYAMLConfiguration::GetProperty	(	YAML::Node &	node,
		YAML::Node &	sharedParametersNode,
		const std::string &	configurationName,
		std::string	propertyName,
		T &	property
	)		const

protected

Actually handles retrieving parameters from YAML nodes.

For propertyName = "hello:example_special:property", the retrieval procedure is as follows:

Extract node name by searching the propertyName up to the delimiter (in this case, "hello").
Look up the node name.
- If the node exists, recurse with node[nodeName] and with remaining propertyName = "example_special:property".
- If it doesn't exist, check for the specialization delimiter (default: "_") and take the node name as everything before the delimiter (for example, "example_special" leads to "example").
If the delimiter is not found, then atempt to extract the property with the remaining node name.
- If the property is arithmetic, std::string, or bool, it will check if the property is instead a shared parameter. If so, it will retrieve the shared parameter value.
- The property is stored in the property, and true is returned if the effort was successful.

Parameters

[in]	node	Main YAML node containing the properties
[in]	sharedParametersNode	YAML node containing the shared parameters
[in]	configurationName	Name of the configuration type.
[in]	propertyName	Name of the property to retrieve
[out]	property	Contains the retrieved property

Returns: True if the property was set successfully

Definition at line 456 of file AliYAMLConfiguration.h.

template<typename T >

bool AliYAMLConfiguration::GetPropertyFromNode	(	const YAML::Node &	node,
		std::string	propertyName,
		T &	property
	)		const

protected

Utility function to retrieve the property from a already selected YAML node.

Parameters

[in]	node	YAML node from which the property should be retrieved
[in]	propertyName	Name of the property to retrieve
[out]	property	Contains the retrieved property

Returns: True if the property was set successfully

Definition at line 323 of file AliYAMLConfiguration.h.

Referenced by AddConfiguration(), and GetProperty().

bool AliYAMLConfiguration::Initialize ( )

Initialize configurations.

This includes storing the contents of the YAML configurations into strings so that they can be streamed to the grid. (yaml-cpp objects do not work properly with ROOT streamers).

NOTE: fConfigurationInitialized is set to true if the function is successful.

Definition at line 340 of file AliYAMLConfiguration.cxx.

Referenced by AliEmcalCorrectionTask::InitializeConfiguration().

bool AliYAMLConfiguration::IsSharedValue ( std::string & value ) const

protected

Check if value is a shared parameter, meaning we should look at another node. Also edits the input string to remove "sharedParameters:" if it exists, making it ready for use.

Parameters

[in] value String containing the string value return by the parameter.

Returns: True if the value is shared.

Definition at line 400 of file AliYAMLConfiguration.cxx.

Referenced by GetProperty().

std::ostream & AliYAMLConfiguration::Print	(	std::ostream &	in,
		const int	index = `-1`
	)		const

Print YAML configuration information on an output stream using the string representation provided by AliYAMLConfiguration::toString(). Used by operator<<.

If index = -1 (which is the default argument), then all configurations will be printed!

Parameters

in	output stream stream
index	Index of the configuration to print.

Returns: reference to the output stream

Definition at line 474 of file AliYAMLConfiguration.cxx.

Referenced by CompareConfigurations(), operator<<(), and Print().

std::ostream & AliYAMLConfiguration::Print	(	std::ostream &	in,
		const std::string &	configurationName
	)		const

Print YAML configuration information on an output stream using the string representation provided by AliYAMLConfiguration::toString(). Used by operator<<

Parameters

in	output stream stream.
configurationName	Name of the configuration to print.

Returns: reference to the output stream

Definition at line 487 of file AliYAMLConfiguration.cxx.

void AliYAMLConfiguration::Print ( Option_t * opt = "" ) const

Print basic YAML configuration information using the string representation provided by AliYAMLConfiguration::toString()

Definition at line 496 of file AliYAMLConfiguration.cxx.

void AliYAMLConfiguration::PrintConfiguration	(	std::ostream &	stream,
		const std::pair< std::string, YAML::Node > &	configPair
	)		const

protected

Print a particular configuration.

Parameters

[in] index Index of the YAML configuration.

Definition at line 418 of file AliYAMLConfiguration.cxx.

Referenced by toString().

template<typename T >

void AliYAMLConfiguration::PrintRetrievedPropertyValue	(	std::stringstream &	tempMessage,
		const T &	property
	)		const

protected

Wrapper function to resolve ambiguity in function overloading. By passing 0 as the last argument to the PrintRetrievedPropertyValueImpl(...) functions, it will first attempt to use the matching int function, and then fall back the to the long function. This is effectively a hack to help c++ properly resolve the function to call.

Inspired by: https://stackoverflow.com/a/38283990

Parameters

[in]	property	Property to be printed
[in,out]	tempMessage	Stringstream into which the property should be streamed

Definition at line 307 of file AliYAMLConfiguration.h.

Referenced by GetProperty().

template<typename T >

auto AliYAMLConfiguration::PrintRetrievedPropertyValueImpl	(	std::stringstream &	tempMessage,
		const T &	property,
		int
	)		const -> decltype(tempMessage << property, void())

protected

Prints the retrieved property value if the type implements operator<<(). For more on how this achieved, see: https://stackoverflow.com/a/22759368 and https://stackoverflow.com/a/11866675. NOTE: This function should not be called directly, but through PrintRetrievedPropertyValue(...)

NOTE: This function returns void!

Parameters

[in]	property	Property to be printed
[in,out]	tempMessage	Stringstream into which the property should be streamed

Definition at line 255 of file AliYAMLConfiguration.h.

Referenced by PrintRetrievedPropertyValue().

template<typename T >

auto AliYAMLConfiguration::PrintRetrievedPropertyValueImpl	(	std::stringstream &	tempMessage,
		const std::vector< T > &	property,
		int
	)		const -> decltype(property.begin(), property.end(), tempMessage << std::declval<T>(), void())

protected

Prints the retrieved values in a vector if the value is a vector (more specifically, if it implements begin() and end()) and if the type of the vector can be streamed in an ostream object. NOTE: This function should not be called directly, but through PrintRetrievedPropertyValue(...)

Parameters

[in]	property	Property to be printed
[in,out]	tempMessage	Stringstream into which the property should be streamed

Definition at line 269 of file AliYAMLConfiguration.h.

template<typename T >

void AliYAMLConfiguration::PrintRetrievedPropertyValueImpl	(	std::stringstream &	tempMessage,
		const T &	property,
		long
	)		const

protected

Handles all other cases where the property is not covered by the other functions.

NOTE: This function should not be called directly, but through PrintRetrievedPropertyValue(...)

NOTE: Cannot use "..." as a function argument here as a fall back because it causes problems with ROOT dictionary generation...

Parameters

[in]	property	Property to be printed
[in,out]	tempMessage	Stringstream into which the property should be streamed

Definition at line 289 of file AliYAMLConfiguration.h.

bool AliYAMLConfiguration::Reinitialize ( )

Reinitialize the configurations from the strings after streaming. This is required because the YAML node objects cannot be streamed.

This should be called immediately after the object is streamed on the grid. For example, at UserCreateOutputObjects().

Returns: True if the configurations were re-initialized.

Definition at line 366 of file AliYAMLConfiguration.cxx.

Referenced by AliEmcalCorrectionTask::CompareToStoredConfiguration(), and AliEmcalCorrectionTask::UserCreateOutputObjects().

bool AliYAMLConfiguration::RemoveConfiguration ( const unsigned int i )

Remove a configuration at a given index.

Parameters

[in] i Index of the configuration to be rmeoved.

Returns: true if the configuration was removed.

Definition at line 118 of file AliYAMLConfiguration.cxx.

Referenced by AliEmcalCorrectionTask::CompareToStoredConfiguration().

bool PWG::Tools::AliYAMLConfiguration::RemoveConfiguration ( const std::string & name )

inline

Definition at line 145 of file AliYAMLConfiguration.h.

Referenced by RemoveConfiguration().

void AliYAMLConfiguration::SetupReadingConfigurationFilePath	(	std::string &	filename,
		const std::string &	fileIdentifier
	)		const

protected

Handles setting up the configuration file to be opened, including in AliPhysics and on the grid. Cannot just use TFile::Open() because the YAML file is just text as opposed to a root file. In the case of a file on the grid, it is copied locally.

Parameters

[in,out]	filename	Name of the file to be open
[in]	fileIdentifier	Additional file identifier to add onto the file name

Definition at line 256 of file AliYAMLConfiguration.cxx.

Referenced by AddConfiguration().

std::string AliYAMLConfiguration::toString ( const int index = -1 ) const

Prints information about the YAML configuration(s).

If index = -1 (which is the default argument), then all configurations will be printed!

Parameters

index Index of the YAML configuration to be printed.

Returns: std::string containing information about the task.

Definition at line 432 of file AliYAMLConfiguration.cxx.

Referenced by Print().

bool AliYAMLConfiguration::WriteConfiguration	(	const std::string &	filename,
		const unsigned int	index
	)		const

Write a YAML configuration node to file.

Parameters

[in]	index	Index of the YAML configuration node.
[in]	filename	Filename to write the node to.

Returns: True if write was successful.

Definition at line 138 of file AliYAMLConfiguration.cxx.

Referenced by AliAnalysisTaskEmcalEmbeddingHelper::AutoConfigurePtHardBins(), WriteConfiguration(), and AliEmcalCorrectionTask::WriteConfigurationFile().

bool AliYAMLConfiguration::WriteConfiguration	(	const std::string &	filename,
		const std::string &	configurationName
	)		const

Write a YAML configuration node to file.

Parameters

[in]	configurationName	Name of the YAML configuration node.
[in]	filename	Filename to write the node to.

Returns: True if write was successful.

Definition at line 170 of file AliYAMLConfiguration.cxx.

void AliYAMLConfiguration::WriteConfigurationToFilePath	(	const std::string &	localFilename,
		std::string	filename
	)		const

protected

Write a selected YAML configuration to file. Practically, it copies a local file to the desired location] to ensure seamless access to AliEn.

Parameters

[in]	filename	Filename to which the configuration should be written.
[in]	localFilename	Filename where the configuration was written locally.

Definition at line 299 of file AliYAMLConfiguration.cxx.

Referenced by WriteConfiguration().

template<typename T >

bool AliYAMLConfiguration::WriteProperty	(	std::string	propertyName,
		T &	property,
		std::string	configurationName = `""`
	)

Write a value to a YAML configuration. Note that the value is written to the YAML configuration, but then the YAML configuration needs to explicitly be written to file if the changes should be persistent.

Parameters

[in]	propertyPath	Path to the property in the YAML file.
[in]	property	Property to be written.
[in]	configurationName	Name of the YAML configuration file to which the property should be written.

Returns: True if the write was successful.

Definition at line 564 of file AliYAMLConfiguration.h.

Referenced by AliAnalysisTaskEmcalEmbeddingHelper::AutoConfigurePtHardBins().

template<typename T >

void AliYAMLConfiguration::WriteValue	(	YAML::Node &	node,
		std::string	propertyName,
		T &	property
	)

protected

Determine where the value should be written and write it to the appropriate YAML node.

Parameters

[in,out]	node	YAML node where the property should (eventually) be written.
[in]	propertyName	Name of the property to be written.
[in]	property	Property to be written to the YAML node.

Definition at line 593 of file AliYAMLConfiguration.h.

Referenced by WriteProperty().

Friends And Related Function Documentation

std::ostream& operator<<	(	std::ostream &	in,
		const AliYAMLConfiguration &	myTask
	)

friend

Implementation of the output stream operator for AliYAMLConfiguration. Printing basic YAML configuration information provided by the function toString(). Note that since this is friend, it is defined outside the namespace.

Parameters

in	output stream
myTask	Task which will be printed

Returns: Reference to the output stream

Definition at line 513 of file AliYAMLConfiguration.cxx.

Member Data Documentation

std::vector<std::pair<std::string, YAML::Node> > PWG::Tools::AliYAMLConfiguration::fConfigurations

protected

! Contains all YAML configurations. The first element has the highest precedence.

Definition at line 230 of file AliYAMLConfiguration.h.

Referenced by AddConfiguration(), CompareConfigurations(), DoesConfigurationExist(), GetConfiguration(), GetConfigurationIndexFromName(), GetConfigurationNameFromIndex(), GetProperty(), Initialize(), Print(), Reinitialize(), RemoveConfiguration(), toString(), WriteConfiguration(), and WriteProperty().

std::vector<std::pair<std::string, std::string> > PWG::Tools::AliYAMLConfiguration::fConfigurationsStrings

protected

Contains all YAML configurations as strings so that they can be streamed.

Definition at line 232 of file AliYAMLConfiguration.h.

Referenced by Initialize(), Reinitialize(), and toString().

std::string PWG::Tools::AliYAMLConfiguration::fDelimiter

protected

Delimiter character to separate each level of the request.

Definition at line 236 of file AliYAMLConfiguration.h.

Referenced by GetProperty(), and toString().

bool PWG::Tools::AliYAMLConfiguration::fInitialized

protected

True if the configurations have been initialized.

Definition at line 234 of file AliYAMLConfiguration.h.

Referenced by Initialize(), Reinitialize(), and toString().

std::string PWG::Tools::AliYAMLConfiguration::fPrefixString

protected

Contains the prefix of any names base node names which should be removed.

Definition at line 235 of file AliYAMLConfiguration.h.

Referenced by GetProperty(), and toString().

The documentation for this class was generated from the following files:

PWG/Tools/AliYAMLConfiguration.h
PWG/Tools/AliYAMLConfiguration.cxx

Public Member Functions

Protected Member Functions

Protected Attributes

Print a particular configuration at a given index or name to a file.

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation

Member Data Documentation